Kaina, mokesčiai, muitai, pristatymas, B2B
Prekės siunčiamos iš EU. Nurodytos kainos, kur taikoma, jau įskaičiuoja VAT. Pristatant už EU ribų, gali būti taikomi vietiniai mokesčiai, muitai, importo VAT arba vežėjo administravimo mokesčiai.
Norėdami sužinoti galimus pristatymo būdus ir jų kainas, įdėkite prekes į krepšelį, pereikite prie apmokėjimo ir įveskite savo pristatymo adresą.
EU šalių įmonės, turinčios VAT registraciją, gali pirkti prekes taikant 0% VAT.
Norėdami pirkti kaip B2B klientas, pirmiausia turite užregistruoti savo įmonę kliento paskyroje.
Aprašymas
A compact multi-planar rigging plate that aligns two rope devices side by side for twin tension rope systems and load-sharing anchors.
The SQUID rig plate brings two hardware devices together for dual operation, with a large primary attachment point for redundant anchoring and two perpendicular secondary points that keep the devices aligned. The spacing it sets between the devices lets a single operator keep simultaneous twin tension control using the dual-handle technique.
The attachment points accept a wide range of connection methods and position rope hardware so that it can be loaded and unloaded while connected. The plate orients itself towards the load and lets the components move freely, which reduces binding and shifting if an anchor or line fails. Made from aircraft grade aluminium with no moving parts, it is CE marked, classified to NFPA General Use for specific configurations including TTRS, and to NFPA Technical Use when the secondary points are pulled directly apart.
Key features
- Multi-planar design — Perpendicular attachment points optimise device alignment for twin tension rope systems.
- Single-operator control — Two devices are held side by side so one operator can manage both for better shared tension.
- Smooth loading — Connected hardware loads and unloads easily and the components orient freely towards the load.
- Failure tolerance — Shifting and extension are reduced in the event of a line or anchor failure.
- Carabiner capacity — The primary point fits two (G) or three (T) carabiners and each secondary point one (G) or two (T).
- Solid construction — Simple aircraft grade aluminium with no moving parts, strong, compact and lightweight.
Typical applications
- Twin tension rope systems with two descent control devices in the double CLUTCH technique
- Litter bridles, cross hauls and redundant load-sharing anchors
- Technical rope rescue and work-at-height rigging
Please note
More carabiners may fit in the SQUID attachment points depending on the type of carabiners, applied loads, and rigging practices involved. Care should be taken to avoid binding, wedging, or other geometric restraints.
Technical specifications
| Weight | 240 g (.52 lb) |
| Material | Aluminium |
| Colour | Black |
| Dimensions | 10.4 × 8.4 × 5.1 cm (4.1 × 3.3 × 2.0 in) |
| Minimum hole diameter | Primary 3.6 cm (1.42 in); secondary 2.7 cm (1.07 in) |
| Certification | NFPA (G) - specific configurations; NFPA (T); CE |
| Minimum breaking strength (3 sigma) | 45 kN (10,116 lbf) - specific configurations; 27.7 kN (6,227 lbf) |
In the box
- 1 × Rig Plate, SQUID, Black
Model information
| Brand | CMC |
| Model | Rig Plate, SQUID, Black |
| MPN | 300020 |
