Forward Controls Design OPF-VP9 Optic Plate – HK VP9, RMR
Forward Controls Design OPF-VP9 Optic Plate – HK VP9, RMR
Forward Controls Design OPF-VP9 Optic Plate – HK VP9, RMR
Forward Controls Design OPF-VP9 Optic Plate – HK VP9, RMR
Forward Controls Design OPF-VP9 Optic Plate – HK VP9, RMR
Suurendamiseks liigu pildile Suurendamiseks klikka pildil
Forward Controls Design OPF-VP9 Optic Plate – HK VP9, RMRForward Controls Design OPF-VP9 Optic Plate – HK VP9, RMRForward Controls Design OPF-VP9 Optic Plate – HK VP9, RMRForward Controls Design OPF-VP9 Optic Plate – HK VP9, RMRForward Controls Design OPF-VP9 Optic Plate – HK VP9, RMR

Forward Controls Design OPF-VP9 Optic Plate – HK VP9, RMR

Forward Controls DesignTootekood:77266 MPN: OPF-VP9, RMR
Arvustusi pole
Hind:
€93,92

Maksud, Saatmiskulu arvutatakse tellimuse vormistamisel

Saadavus:
Tellitav

Restocking in about 2 weeks after order confirmation

Hind, maksud, tollid, saatmine, B2B

Kaubad saadetakse Euroopa Liidust. Näidatud hinnad sisaldavad käibemaksut, kui see kohaldub. Saatmised väljaspool EU-d võivad olla allutatud kohalikule maksustamisele, tollitasudele, impordi käibemaksule või veoettevõtja käitlemistasudele.

Saadaolevate saatmisvõimaluste ja kulude nägemiseks lisage kaubad ostukorvi, minge kassale ja sisestage oma saatmisaadress.
EU ettevõtted käibemaksu registreerimisega saavad kaupu osta 0% käibemaksuga.
B2B kliendina ostmiseks peate esmalt oma ettevõtte kliendina registreerima.

Kirjeldus

A steel optic plate that mounts a Trijicon RMR, SRO, RMR HD or RCR on the Heckler & Koch VP9, holding the sight immobile under recoil.

Like the OPF-G, RMR for Glock MOS pistols, the OPF-VP9, RMR is designed to hold the sight immobile even before the sight screws are torqued. It is precision machined from 4140 steel and black nitrided.

Key features

  • Sight held immobile — Same approach as the OPF-G, RMR plate for the Glock MOS.
  • 4140 steel — Precision machined and black nitride coated.
  • Hardware included — Supplied with plate-to-slide and sight-to-plate screws and threadlocker.

Compatibility and fitment

  • Pistols: Heckler & Koch VP9. Not compatible with the HK VP9CC, or with the HK Parts MP5 mount that uses the VP9 slide footprint.
  • Sights: Trijicon RMR, SRO, RMR HD and RCR. With the RCR you must use the capstan screws supplied with the RCR.
  • Do not use the screws supplied with the RMR HD — they are too long. Use the 6-32 × 3/8 in screws supplied with the plate.
  • Holosun: the same tight fit cannot be guaranteed. Never use the screws supplied with this plate with a Holosun sight — they are for Trijicon sights only (Holosun uses a 90° countersink, the RMR and SRO 82°), and long screws will damage and bend the plate.
  • Backup sights: the taller suppressor-height sights of the VP9 Tactical give a lower 1/3 co-witness. Lower co-witness sights are available from Night Fision.
  • A torque wrench graduated in in·lb is needed to tighten the screws to the stated values.

Technical specifications

Material 4140 steel
Finish Black nitride
Plate-to-slide torque (M4-0.7 × 8 mm, T20) 20 in·lb (2.3 N·m)
Sight-to-plate torque (6-32 × 3/8 in) 13 in·lb (1.5 N·m)
Country of manufacture USA

In the box

  • 1 × OPF-VP9, RMR plate
  • 2 × plate-to-slide screws, M4-0.7 × 8 mm, T20
  • 4 × sight-to-plate screws, 6-32 × 3/8 in
  • 1 × packet of Vibra-Tite VC-3 threadlocker

Model information

Brand Forward Controls Design
Model OPF-VP9, RMR — HK VP9 plate for Trijicon RMR / SRO / RMR HD / RCR
MPN OPF-VP9, RMR

Võib teile meeldida

Hiljuti vaadatud