Forward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACRO
Forward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACRO
Forward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACRO
Forward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACRO
Forward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACRO
Forward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACRO
Forward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACRO
Rulla över bilden för att zooma in Klicka på bilden för att zooma
Forward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACROForward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACROForward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACROForward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACROForward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACROForward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACROForward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACRO

Forward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACRO

Forward Controls DesignSKU: 77260 MPN: OPF-PDP (V2), ACRO
Inga recensioner
Pris:
€88,39

Slutlig skatt Frakt beräknad vid kassa

Lager:
Beställd

Restocking in about 2 weeks after order confirmation

Pris, skatter, tullavgifter, frakt, B2B

Varorna skickas från EU. Angivna priser inkluderar moms (VAT) där det är tillämpligt. Leveranser utanför EU kan omfattas av lokala skatter, tullavgifter, importmoms eller hanteringsavgifter från transportören.

För att se tillgängliga fraktalternativ och kostnader, lägg varorna i kundvagnen, gå till kassan och ange din leveransadress.
EU-företag med VAT-registrering kan köpa varor med 0 % moms.
För att köpa som B2B-kund måste du först registrera ditt företag som kund.

Beskrivning

A steel optic plate that mounts an Aimpoint ACRO P-1 or P-2 or a Steiner MPS on the Walther PDP v2.

Based on Forward Controls Design's Glock MOS plate design, the OPF-PDP v2, ACRO has the same tight tolerances and the same design that holds the sight immobile on the plate. It is a solid-state design with no moving parts, machined from solid 4140 steel and black nitride treated, and is a joint project with TangoDown.

Key features

  • Sight held immobile — Same proven design as the OPF-G plates for the Glock MOS.
  • Solid 4140 steel — Machined from solid 4140 steel and black nitride treated.
  • Hardware included — Supplied with plate-to-slide screws and threadlocker.

Compatibility and fitment

  • For the Walther PDP v2 only; it will not work on the PDP v1. V2 slides have a longer optic cut; according to Walther's 2021 information their serial numbers start with FDL9203, FDM0001 or FDN3124. Remove the cover plate to verify the version before ordering.
  • Compatible with the PDP-F.
  • Sights: guaranteed to work only with the Aimpoint ACRO P-1 and P-2 and the Steiner MPS. Other sights sold as ACRO-footprint have not been tested and are not supported.
  • Backup sights: Ameriglo GL-811, GL-815 or GL-506 give a lower 1/3 co-witness; GL-429 gives a lower 1/4 co-witness.

Technical specifications

Material 4140 steel
Finish Black nitride
Plate-to-slide torque 13 in·lb (1.5 N·m)
Sight mounting screw torque — ACRO P-1/P-2 26 in·lb (2.9 N·m)
Sight mounting screw torque — Steiner MPS 24 in·lb (2.7 N·m)
Country of manufacture USA

In the box

  • 1 × OPF-PDP v2, ACRO plate
  • Plate-to-slide screws, M3-0.5 × 6 mm
  • 1 × packet of Vibra-Tite VC-3 threadlocker

Model information

Brand Forward Controls Design
Model OPF-PDP v2, ACRO — Walther PDP v2 plate for Aimpoint ACRO P-1/P-2 and Steiner MPS
MPN OPF-PDP (V2), ACRO

Du kanske också gillar

Nyligen visade