Pris, skatter, tullavgifter, frakt, B2B
Varorna skickas från EU. Angivna priser inkluderar moms (VAT) där det är tillämpligt. Leveranser utanför EU kan omfattas av lokala skatter, tullavgifter, importmoms eller hanteringsavgifter från transportören.
För att se tillgängliga fraktalternativ och kostnader, lägg varorna i kundvagnen, gå till kassan och ange din leveransadress.
EU-företag med VAT-registrering kan köpa varor med 0 % moms.
För att köpa som B2B-kund måste du först registrera ditt företag som kund.
Beskrivning
A steel optic plate that mounts an EOTech EFLX on Glock MOS slides, with front and rear fences that hold the sight still under recoil.
The OPF-G, EFLX uses the same design as the OPF-G, RMR: a front and a rear fence and tight plate-to-slide and sight-to-plate tolerances keep the sight from moving along the bore in recoil. It is a collaboration between TangoDown and Forward Controls Design.
The same plate is used for the EOTech EFLX and the Leupold DeltaPoint Pro, so the engraving on the plate may read DPP only.
Key features
- Front and rear fences — Hold the sight immobile so the mounting screws are not loaded in recoil.
- Billet 4140 steel — Machined from billet 4140, heat treated and black nitride coated.
- Two sights, one plate — Fits the EOTech EFLX and the Leupold DeltaPoint Pro.
Compatibility and fitment
- Fits standard Glock MOS slides only. It does not fit the law-enforcement-only MOS3 (DPP), MOS5 (RMR), MOS6 (Holosun 509T) or MOS7 (ACRO) slides.
- It is not an adapter that converts an RMR footprint to a DeltaPoint Pro / EFLX footprint.
- Slides: Glock MOS G17, G19, G20, G21, G22, G23, G26, G34, G40, G45, G47 and G49. Does not fit the slimline G43X and G48.
- Sights: EOTech EFLX and Leupold DeltaPoint Pro.
- Sight-to-plate screws are not included. Use the 9.75 mm M4 screws supplied by EOTech with the EFLX. Do not use DeltaPoint Pro screws with an EFLX: they are longer and can bend or break the plate.
- Backup sights: the EFLX needs sight sets with a front sight height of at least 0.365 in. At 0.365 in only the tops of the sights are visible low in the window; 0.407 in sets are easier to use.
- A torque wrench graduated in in·lb is needed to tighten the screws to the stated values.
Technical specifications
| Material | 4140 steel, heat treated |
| Finish | Black nitride |
| Plate-to-slide torque | 13 in·lb (1.5 N·m) |
| Sight-to-plate torque | 20 to 25 in·lb (2.3 to 2.8 N·m) |
| Country of manufacture | USA |
In the box
- 1 × OPF-G, EFLX plate
- 2 × plate-to-slide screws, M3-0.5 × 6 mm
- 1 × packet of Vibra-Tite VC-3 threadlocker
Model information
| Brand | Forward Controls Design |
| Model | OPF-G, EFLX — Glock MOS plate for EOTech EFLX, 4140 steel, black nitride |
| MPN | OPF-G, EFLX |