Forward Controls Design OPF-VP9 Optic Plate – HK VP9, RMR
Forward Controls Design OPF-VP9 Optic Plate – HK VP9, RMR
Forward Controls Design OPF-VP9 Optic Plate – HK VP9, RMR
Forward Controls Design OPF-VP9 Optic Plate – HK VP9, RMR
Forward Controls Design OPF-VP9 Optic Plate – HK VP9, RMR
Ritiniet kursoru virs attēla, lai tuvinātu Noklikšķiniet uz attēla, lai tuvinātu
Forward Controls Design OPF-VP9 Optic Plate – HK VP9, RMRForward Controls Design OPF-VP9 Optic Plate – HK VP9, RMRForward Controls Design OPF-VP9 Optic Plate – HK VP9, RMRForward Controls Design OPF-VP9 Optic Plate – HK VP9, RMRForward Controls Design OPF-VP9 Optic Plate – HK VP9, RMR

Forward Controls Design OPF-VP9 Optic Plate – HK VP9, RMR

Forward Controls DesignSKU:77266 MPN: OPF-VP9, RMR
Nav atsauksmju
Cena:
€93,92

Ieskaitot 22% PVN. Piegāde tiek aprēķināta izrakstīšanās laikā

Krājumi:
Drīzumā pievedums

Restocking in about 2 weeks after order confirmation

Cena, nodokļi, nodevas, piegāde, B2B

Preces tiek nosūtītas no EU. Redzamajās cenās, kur piemērojams, ir iekļauts VAT. Piegādēm ārpus EU var piemērot vietējos nodokļus, muitas nodevas, importa VAT vai pārvadātāja apkalpošanas maksas.

Lai redzētu pieejamās piegādes iespējas un izmaksas, ievietojiet preces grozā, dodieties uz noformēšanu un ievadiet savu piegādes adresi.
EU uzņēmumi ar VAT reģistrāciju var iegādāties preces ar 0% VAT.
Lai pirktu kā B2B klients, jums vispirms nepieciešams reģistrēt savu uzņēmumu kā klientu.

Apraksts

A steel optic plate that mounts a Trijicon RMR, SRO, RMR HD or RCR on the Heckler & Koch VP9, holding the sight immobile under recoil.

Like the OPF-G, RMR for Glock MOS pistols, the OPF-VP9, RMR is designed to hold the sight immobile even before the sight screws are torqued. It is precision machined from 4140 steel and black nitrided.

Key features

  • Sight held immobile — Same approach as the OPF-G, RMR plate for the Glock MOS.
  • 4140 steel — Precision machined and black nitride coated.
  • Hardware included — Supplied with plate-to-slide and sight-to-plate screws and threadlocker.

Compatibility and fitment

  • Pistols: Heckler & Koch VP9. Not compatible with the HK VP9CC, or with the HK Parts MP5 mount that uses the VP9 slide footprint.
  • Sights: Trijicon RMR, SRO, RMR HD and RCR. With the RCR you must use the capstan screws supplied with the RCR.
  • Do not use the screws supplied with the RMR HD — they are too long. Use the 6-32 × 3/8 in screws supplied with the plate.
  • Holosun: the same tight fit cannot be guaranteed. Never use the screws supplied with this plate with a Holosun sight — they are for Trijicon sights only (Holosun uses a 90° countersink, the RMR and SRO 82°), and long screws will damage and bend the plate.
  • Backup sights: the taller suppressor-height sights of the VP9 Tactical give a lower 1/3 co-witness. Lower co-witness sights are available from Night Fision.
  • A torque wrench graduated in in·lb is needed to tighten the screws to the stated values.

Technical specifications

Material 4140 steel
Finish Black nitride
Plate-to-slide torque (M4-0.7 × 8 mm, T20) 20 in·lb (2.3 N·m)
Sight-to-plate torque (6-32 × 3/8 in) 13 in·lb (1.5 N·m)
Country of manufacture USA

In the box

  • 1 × OPF-VP9, RMR plate
  • 2 × plate-to-slide screws, M4-0.7 × 8 mm, T20
  • 4 × sight-to-plate screws, 6-32 × 3/8 in
  • 1 × packet of Vibra-Tite VC-3 threadlocker

Model information

Brand Forward Controls Design
Model OPF-VP9, RMR — HK VP9 plate for Trijicon RMR / SRO / RMR HD / RCR
MPN OPF-VP9, RMR

Jums var patikt arī

Nesen skatīti