A steel optic plate that mounts a Trijicon RMR, RMR HD, SRO or RCR on the Walther PDP v2, holding the sight immobile under recoil.
Based on Forward Controls Design's Glock MOS plate design, the OPF-PDP, RMR uses the same tight tolerances and the same design that holds the sight immobile on the plate. It is a solid-state design with no moving parts, machined from solid steel and black nitride treated, and it needs no sealing plate under the RMR.
Key features
-
Sight held immobile — Same proven design as the OPF-G plates for the Glock MOS.
-
No sealing plate needed — The RMR mounts directly on the plate.
-
Solid steel — Machined from solid 1018 steel and black nitride treated.
Compatibility and fitment
- For the Walther PDP v2 only; v1 and v2 plates are not interchangeable. V2 slides have a longer optic cut (1.93 in at its longest, against 1.85 in on v1); according to Walther's 2021 information their serial numbers start with FDL9203, FDM0001 or FDN3124. Remove the cover plate and measure the cut to confirm the version before ordering.
- Compatible with the PDP-F.
- Sights: Trijicon RMR, SRO, RMR HD and RCR. With the RCR you must use the capstan screws supplied with the RCR.
- Use only 3/8 in long 6-32 sight screws. Do not use longer 1/2 in screws.
- Backup sights: Ameriglo GL-811 or GL-506 give a lower 1/3 co-witness.
Technical specifications
| Material |
1018 steel |
| Finish |
Black nitride |
| Plate-to-slide torque |
13 in·lb (1.5 N·m) |
| Sight-to-plate torque |
13 to 15 in·lb (1.5 to 1.7 N·m) |
| Country of manufacture |
USA |
Model information
| Brand |
Forward Controls Design |
| Model |
OPF-PDP v2, RMR — Walther PDP v2 plate for Trijicon RMR / SRO / RMR HD / RCR |
| MPN |
OPF-PDP (V2), RMR |
