A steel optic plate that mounts an Aimpoint ACRO P-1 or P-2 or a Steiner MPS on the Walther PDP v2.
Based on Forward Controls Design's Glock MOS plate design, the OPF-PDP v2, ACRO has the same tight tolerances and the same design that holds the sight immobile on the plate. It is a solid-state design with no moving parts, machined from solid 4140 steel and black nitride treated, and is a joint project with TangoDown.
Key features
-
Sight held immobile — Same proven design as the OPF-G plates for the Glock MOS.
-
Solid 4140 steel — Machined from solid 4140 steel and black nitride treated.
-
Hardware included — Supplied with plate-to-slide screws and threadlocker.
Compatibility and fitment
- For the Walther PDP v2 only; it will not work on the PDP v1. V2 slides have a longer optic cut; according to Walther's 2021 information their serial numbers start with FDL9203, FDM0001 or FDN3124. Remove the cover plate to verify the version before ordering.
- Compatible with the PDP-F.
- Sights: guaranteed to work only with the Aimpoint ACRO P-1 and P-2 and the Steiner MPS. Other sights sold as ACRO-footprint have not been tested and are not supported.
- Backup sights: Ameriglo GL-811, GL-815 or GL-506 give a lower 1/3 co-witness; GL-429 gives a lower 1/4 co-witness.
Technical specifications
| Material |
4140 steel |
| Finish |
Black nitride |
| Plate-to-slide torque |
13 in·lb (1.5 N·m) |
| Sight mounting screw torque — ACRO P-1/P-2 |
26 in·lb (2.9 N·m) |
| Sight mounting screw torque — Steiner MPS |
24 in·lb (2.7 N·m) |
| Country of manufacture |
USA |
In the box
- 1 × OPF-PDP v2, ACRO plate
- Plate-to-slide screws, M3-0.5 × 6 mm
- 1 × packet of Vibra-Tite VC-3 threadlocker
Model information
| Brand |
Forward Controls Design |
| Model |
OPF-PDP v2, ACRO — Walther PDP v2 plate for Aimpoint ACRO P-1/P-2 and Steiner MPS |
| MPN |
OPF-PDP (V2), ACRO |
