Preis, Steuern, Zölle, Versand, B2B
Die Ware wird aus der EU versendet. Die angezeigten Preise enthalten, sofern zutreffend, die VAT. Bei Lieferungen außerhalb der EU können lokale Steuern, Zölle, Einfuhr-VAT oder Bearbeitungsgebühren des Transportunternehmens anfallen.
Um die verfügbaren Versandoptionen und -kosten zu sehen, legen Sie die Artikel in den Warenkorb, gehen Sie zur Kasse und geben Sie Ihre Lieferadresse ein.
EU-Unternehmen mit VAT-Registrierung können Waren mit 0 % VAT erwerben.
Um als B2B-Kunde einzukaufen, müssen Sie Ihr Unternehmen zunächst als Kunde registrieren.
Beschreibung
An optic plate that mounts a Trijicon RMRcc on the slimline Glock 43X MOS and Glock 48 MOS, in black nitrided 4140 steel.
G43X and G48 MOS slides are cut for direct mounting of the Shield RMSc; the Trijicon RMRcc needs an adapter plate. The OPF-G43X/48, RMRcc keeps the sight as low as possible: with the sealing plate fitted, the bottom of the RMRcc sits almost flush with the top of the slide.
The RMRcc is longer than the G43X/48 MOS cut and overhangs the slide. The sight is positioned towards the centre of the plate to reduce the unsupported overhang of its sealing plate, which keeps the seal around the battery compartment closed. A large lightening cut on the underside is hidden once installed.
Key features
- Low mounting height — The sight sits almost flush with the top of the slide.
- Sealed battery compartment — Sight position on the plate eliminates the gap between the RMRcc and its sealing plate.
- 4140 steel — Machined from 4140 steel and black nitrided.
- Hardware included — Supplied with plate-to-slide and sight-to-plate screws; the screws shipped with the RMRcc can also be used.
Compatibility and fitment
- Fits the Glock G43X MOS and G48 MOS only, with the original MOS footprint for direct mounting of RMSc sights. It will not work with other Glock models.
- Not compatible with the special-run FDE G43X.
- Sights: Trijicon RMRcc only. It will not work with other red dot sights.
- The sealing plate supplied with the Trijicon RMRcc is required for installation.
- Backup sights: a lower 1/3 co-witness needs a sight set with a 0.450 in front sight, such as the Ameriglo GL-527.
- A torque wrench graduated in in·lb is needed to tighten the screws to the stated values.
Technical specifications
| Material | 4140 steel |
| Finish | Black nitride |
| Weight | 0.75 oz (21 g) |
| Plate-to-slide torque | 15 to 20 in·lb (1.7 to 2.3 N·m) |
| Sight-to-plate torque | 15 to 18 in·lb (1.7 to 2.0 N·m) |
In the box
- 1 × OPF-G43X/48, RMRcc plate
- 2 × plate-to-slide screws, M4-0.7 × 8 mm
- 2 × sight-to-plate screws, T10, 5-40 × 1/4 in
- 1 × packet of Vibra-Tite VC-3 threadlocker
Model information
| Brand | Forward Controls Design |
| Model | OPF-G43X/48, RMRcc — Glock 43X/48 MOS plate for Trijicon RMRcc, 4140 steel |
| MPN | OPF-G43X/48, RMRCC |