Price, Taxes, Duties, Shipping, B2B
Goods are shipped from the Estonia (EU). Displayed prices include VAT where applicable. Deliveries outside the EU may be subject to local taxes, customs duties, import VAT, or carrier handling fees.
To see available shipping options and costs, add the items to your cart, proceed to checkout, and enter your shipping address.
EU companies with VAT registration can purchase goods with 0% VAT.
To buy as B2B customer you need to register your company as customer first.
Description
A heavy-duty stainless steel optic plate that mounts a Trijicon RMR, RMR HD, SRO or RCR on Glock Gen 6 ORS slides.
The OPF-G6, RMR replaces the polymer insert of the Glock Gen 6 Optic Ready System with a plate machined from a solid block of 17-4 stainless steel. Its underside is contoured to fill the spindle-shaped cavity in the ORS pocket, and a pocket at the rear engages the slide's locking tab, so the plate cannot rotate or shift.
The steel lugs do not give under sharp impact the way a polymer insert can, which keeps recoil load off the mounting screws. The plate fills the gap in front of and behind the sight on Gen 6 ORS slides.
Key features
- 17-4 stainless steel — Milled from solid 17-4 stainless and black nitride treated; standard on all OPF-G6 plates.
- Uses the ORS locking features — Contoured underside and rear pocket engage the spindle cavity and rear locking tab of the Gen 6 slide.
- Low mounting height — Made without full-width support, which would add 0.07 in of height; the RMR HD, SRO and RCR need no sealing plate and the RMR uses a thin sealing plate instead.
- Tight tolerances — Held tighter than the ORS pocket itself, for hard use.
- Screws included — Four 6-32 × 1/2 in T15 screws with 140,000 PSI tensile strength.
Compatibility and fitment
- For Glock Gen 6 slides with the Optic Ready System (ORS).
- Sights: made for and guaranteed to fit the Trijicon RMR, RMR HD, SRO and RCR only. Not made for, or guaranteed to work with, RMR-footprint sights from other manufacturers.
- Also compatible with the Primary Arms HTX-1, using the adapter plate supplied in the blue bag with the HTX-1.
- A sealing plate is required with the RMR (not included). It is not required with the RMR HD, SRO or RCR.
- Because of slide and sight tolerances there may be a very small gap between the plate's rear fence and the slide, or between the sight and the rear fence. Both fences are cosmetic on this plate, and so is the gap.
- Installation: insert the rear of the plate into the rear of the ORS pocket at an angle, confirm the slide's locking tab has engaged the pocket in the plate, then rotate the front down. A firm press on the front may be needed to seat the plate fully.
Technical specifications
| Material | 17-4 stainless steel |
| Finish | Black nitride |
| Weight | 0.41 oz (12 g) |
| Screw torque | 13 to 15 in·lb (1.5 to 1.7 N·m) |
| Country of manufacture | USA |
In the box
- 1 × OPF-G6, RMR plate
- 4 × screws, 6-32 × 1/2 in, T15
- 1 × packet of Vibra-Tite VC-3 threadlocker
Model information
| Brand | Forward Controls Design |
| Model | OPF-G6, RMR — Glock Gen 6 ORS plate for Trijicon RMR / RMR HD / SRO / RCR |
| MPN | OPF-G6, RMR |