{"title":"Forward Controls Design","description":"\u003cp\u003eForward Controls Design (FCD) is a US manufacturer of duty-grade pistol optic mounting plates and accessories. Its OPF plates are machined from 4140 or 17-4 stainless steel rather than aluminium, with tight tolerances and recoil lugs or fences designed to hold the red dot sight immobile under recoil.\u003c\/p\u003e\u003cp\u003eEurosec is an official Forward Controls Design dealer and buys directly from the manufacturer. The range covers plates for Glock MOS and Gen 6 ORS, SIG Sauer P320 and P365, Walther PDP, Heckler \u0026amp; Koch VP9, FN 509, Smith \u0026amp; Wesson M\u0026amp;P and Staccato pistols, for the Trijicon RMR, SRO, RMR HD, RCR and RMRcc, Aimpoint ACRO, Steiner MPS and Leupold DeltaPoint Pro. Stocked plates are dispatched quickly from our EU warehouse, and other models are ordered from the manufacturer on request.\u003c\/p\u003e\u003cp\u003eFit depends on the exact slide version and sight model, so each product page lists the compatible pistols, sights, screws and torque values. If you are unsure which plate you need, Eurosec can help confirm the fit before you order.\u003c\/p\u003e","products":[{"product_id":"forward-controls-design-opf-g-optic-plate-glock-gen-5-mos-rmr-17-4-ss","title":"Forward Controls Design OPF-G Optic Plate – Glock Gen 5 MOS, RMR (17-4 SS)","description":"\u003ch3\u003eA steel optic plate that mounts a Trijicon RMR, RMR HD, SRO or RCR on Glock MOS slides, in 17-4 stainless steel for salt-water and high-humidity use.\u003c\/h3\u003e\u003cp\u003eThe OPF-G, RMR replaces the factory Glock MOS adapter plate. Front and rear fences hold the sight still under recoil, so the sight-to-plate screws no longer carry the recoil load that loosens or shears them on the factory plate.\u003c\/p\u003e\u003cp\u003eThe plate supports the full width of the sight, so no separate sealing plate is needed, and it is the same thickness as the Glock MOS plate — sight height and iron sight choice stay unchanged. This version is machined from 17-4 stainless steel with a black nitride finish.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront and rear fences\u003c\/strong\u003e — The sight is cradled between two recoil fences, keeping it static relative to the mounting screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-width support\u003c\/strong\u003e — The plate supports the whole base of the RMR and SRO, so a sealing plate is not necessary.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory sight height\u003c\/strong\u003e — Thickness matches the Glock MOS plate; it does not change mounted sight height or require different iron sights.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e17-4 stainless steel\u003c\/strong\u003e — Black nitride treated stainless steel, offered by Forward Controls Design for salt-water divers and high-humidity environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorx hardware\u003c\/strong\u003e — Supplied with correct-length Torx plate-to-slide and sight-to-plate screws.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor Glock Gen 3 to Gen 5 MOS slides only. Not compatible with Glock Gen 6 (ORS) slides — for those use the \u003ca href=\"\/sv\/products\/forward-controls-design-opf-g6-optic-plate-glock-gen-6-ors-rmr\"\u003eOPF-G6, RMR plate\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFits standard Glock MOS slides only. It does not fit the law-enforcement-only MOS3 (DPP), MOS5 (RMR), MOS6 (Holosun 509T) or MOS7 (ACRO) slides.\u003c\/li\u003e\n\u003cli\u003eSlides: Glock MOS Adapter Set 01 and Set 02 compatible — factory MOS G17, G19, G20, G21, G22, G23, G26, G34, G35, G40, G41, G45, G47 and G49 (Gen 4, Gen 5 and the Gen 3 CA MOS).\u003c\/li\u003e\n\u003cli\u003eSights: Trijicon RMR, RMR HD, SRO and RCR.\u003c\/li\u003e\n\u003cli\u003eNot a drop-in part: because of the ±0.005 in tolerance of the RMR and SRO, the plate may need fitting before the sight seats fully. A competent gunsmith can do this.\u003c\/li\u003e\n\u003cli\u003eUse only 3\/8 in long 6-32 sight screws. Do not use longer 1\/2 in screws.\u003c\/li\u003e\n\u003cli\u003eHolosun: fit is not guaranteed. Forward Controls Design does not recommend the Holosun 508T on this plate, and it does not work with the Holosun 509T's RMR adapter plate. If a Holosun sight is used, use the short screws supplied with that sight — never the screws supplied with this plate (Holosun uses a 90° countersink, the RMR and SRO 82°), or the plate may be damaged.\u003c\/li\u003e\n\u003cli\u003eThe plate and the RMR are wider than the G17, G19, G34, G45 and G47 slides and overhang slightly on both sides. On the wider 1.08 in and 1.12 in slides there is no overhang, but the plate's front corners do not follow the slide contour; this is cosmetic.\u003c\/li\u003e\n\u003cli\u003eA torque wrench graduated in in·lb is needed to tighten the screws to the stated values.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e17-4 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.86 oz (24 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e13 in·lb (1.5 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight-to-plate torque\u003c\/td\u003e\n\u003ctd\u003e13 in·lb (1.5 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-G, RMR plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide screws, M3-0.5 × 6 mm\u003c\/li\u003e\n\u003cli\u003e4 × sight-to-plate screws, 6-32 × 3\/8 in (for Trijicon RMR and SRO only)\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-G, RMR — Glock MOS plate for Trijicon RMR \/ RMR HD \/ SRO \/ RCR, 17-4 stainless steel, black nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-G, RMR 17-4 SS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546335617402,"sku":"77237","price":97.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-g-rmr-01.jpg?v=1794317398"},{"product_id":"forward-controls-design-opf-g-optic-plate-glock-gen-5-mos-acro-4140-steel","title":"Forward Controls Design OPF-G Optic Plate – Glock Gen 5 MOS, ACRO (4140 Steel)","description":"\u003ch3\u003eA steel optic plate that mounts an Aimpoint ACRO P-1 or P-2 or a Steiner MPS on Glock MOS slides, in black nitrided 4140 steel.\u003c\/h3\u003e\u003cp\u003eThe OPF-G, ACRO replaces the factory Glock MOS adapter plate with a steel plate built for enclosed-emitter sights on the ACRO footprint. It is identical to the TangoDown AAM-01, which Forward Controls Design tested and chose to offer under its own name rather than design a duplicate.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect MOS fit\u003c\/strong\u003e — Mounts straight into the Glock MOS cut as a Set 01 compatible plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4140 steel\u003c\/strong\u003e — Machined from 4140 steel with a black nitride finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProven design\u003c\/strong\u003e — Identical to the TangoDown AAM-01.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor Glock Gen 3 to Gen 5 MOS slides only. Not compatible with Glock Gen 6 (ORS) slides — for those use the \u003ca href=\"\/sv\/products\/forward-controls-design-opf-g6-optic-plate-glock-gen-6-ors-acro\"\u003eOPF-G6, ACRO plate\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFits standard Glock MOS slides only. It does not fit the law-enforcement-only MOS3 (DPP), MOS5 (RMR), MOS6 (Holosun 509T) or MOS7 (ACRO) slides.\u003c\/li\u003e\n\u003cli\u003eIt is not an adapter that converts an RMR footprint to an ACRO footprint.\u003c\/li\u003e\n\u003cli\u003eSlides: Glock MOS Adapter Set 01 compatible — Gen 4 and Gen 5 MOS and the Gen 3 CA MOS: G17, G19, G20, G21, G22, G23, G26, G34, G35, G40, G41, G45, G47 and G49.\u003c\/li\u003e\n\u003cli\u003eSights: guaranteed to work only with the Aimpoint ACRO P-1 and P-2, the Steiner MPS and Lead \u0026amp; Steel Pandora sights. Other sights sold as ACRO-footprint have not been tested and are not supported by Forward Controls Design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e13 in·lb (1.5 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight mounting screw torque — ACRO P-1\/P-2\u003c\/td\u003e\n\u003ctd\u003e26 in·lb (2.9 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight mounting screw torque — Steiner MPS\u003c\/td\u003e\n\u003ctd\u003e18 in·lb (2.0 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-G, ACRO \/ MPS — Glock MOS plate for Aimpoint ACRO P-1\/P-2 and Steiner MPS, 4140 steel, black nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-G, ACRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546335748474,"sku":"77238","price":88.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-g-acro-01.jpg?v=1794317398"},{"product_id":"forward-controls-design-opf-g-optic-plate-glock-gen-5-mos-acro-17-4-ss","title":"Forward Controls Design OPF-G Optic Plate – Glock Gen 5 MOS, ACRO (17-4 SS)","description":"\u003ch3\u003eA steel optic plate that mounts an Aimpoint ACRO P-1 or P-2 or a Steiner MPS on Glock MOS slides, in 17-4 stainless steel for salt-water and high-humidity use.\u003c\/h3\u003e\u003cp\u003eThe OPF-G, ACRO replaces the factory Glock MOS adapter plate with a steel plate built for enclosed-emitter sights on the ACRO footprint. It is identical to the TangoDown AAM-01, which Forward Controls Design tested and chose to offer under its own name rather than design a duplicate.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect MOS fit\u003c\/strong\u003e — Mounts straight into the Glock MOS cut as a Set 01 compatible plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e17-4 stainless steel\u003c\/strong\u003e — Black nitride treated stainless steel, offered for salt-water divers and high-humidity environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProven design\u003c\/strong\u003e — Identical to the TangoDown AAM-01.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor Glock Gen 3 to Gen 5 MOS slides only. Not compatible with Glock Gen 6 (ORS) slides — for those use the \u003ca href=\"\/sv\/products\/forward-controls-design-opf-g6-optic-plate-glock-gen-6-ors-acro\"\u003eOPF-G6, ACRO plate\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFits standard Glock MOS slides only. It does not fit the law-enforcement-only MOS3 (DPP), MOS5 (RMR), MOS6 (Holosun 509T) or MOS7 (ACRO) slides.\u003c\/li\u003e\n\u003cli\u003eIt is not an adapter that converts an RMR footprint to an ACRO footprint.\u003c\/li\u003e\n\u003cli\u003eSlides: Glock MOS Adapter Set 01 compatible — Gen 4 and Gen 5 MOS and the Gen 3 CA MOS: G17, G19, G20, G21, G22, G23, G26, G34, G35, G40, G41, G45, G47 and G49.\u003c\/li\u003e\n\u003cli\u003eSights: guaranteed to work only with the Aimpoint ACRO P-1 and P-2, the Steiner MPS and Lead \u0026amp; Steel Pandora sights. Other sights sold as ACRO-footprint have not been tested and are not supported by Forward Controls Design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e17-4 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e13 in·lb (1.5 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight mounting screw torque — ACRO P-1\/P-2\u003c\/td\u003e\n\u003ctd\u003e26 in·lb (2.9 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight mounting screw torque — Steiner MPS\u003c\/td\u003e\n\u003ctd\u003e18 in·lb (2.0 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-G, ACRO \/ MPS — Glock MOS plate for Aimpoint ACRO P-1\/P-2 and Steiner MPS, 17-4 stainless steel, black nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-G, ACRO, 17-4 SS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546336010618,"sku":"77239","price":97.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-g-acro-01.jpg?v=1794317398"},{"product_id":"forward-controls-design-opf-g-optic-plate-glock-gen-5-mos-deltapoint-pro","title":"Forward Controls Design OPF-G Optic Plate – Glock Gen 5 MOS, DeltaPoint Pro","description":"\u003ch3\u003eA steel optic plate that mounts a Leupold DeltaPoint Pro on Glock MOS slides, with front and rear fences that hold the sight still under recoil.\u003c\/h3\u003e\u003cp\u003eThe OPF-G, DPP uses the same design as the OPF-G, RMR: a front and a rear fence and tight plate-to-slide and sight-to-plate tolerances keep the sight from moving along the bore in recoil, which is what loosens and shears sight screws. It is a collaboration between TangoDown and Forward Controls Design.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront and rear fences\u003c\/strong\u003e — Hold the DeltaPoint Pro immobile so the mounting screws are not loaded in recoil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet 4140 steel\u003c\/strong\u003e — Machined from billet 4140, heat treated and black nitride coated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso fits other sights\u003c\/strong\u003e — Works with the Vortex Defender ST, XT and XL and the EOTech EFLX as well as the DeltaPoint Pro.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits standard Glock MOS slides only. It does not fit the law-enforcement-only MOS3 (DPP), MOS5 (RMR), MOS6 (Holosun 509T) or MOS7 (ACRO) slides.\u003c\/li\u003e\n\u003cli\u003eIt is not an adapter that converts an RMR footprint to a DeltaPoint Pro footprint.\u003c\/li\u003e\n\u003cli\u003eSlides: Glock MOS G17, G19, G20, G21, G22, G23, G26, G34, G40, G45, G47 and G49. The G40 uses the slightly wider Set 02 plates; the OPF-G, DPP works on it but does not completely fill the width of the MOS cut.\u003c\/li\u003e\n\u003cli\u003eSights: Leupold DeltaPoint Pro, Vortex Defender ST, XT and XL, and EOTech EFLX.\u003c\/li\u003e\n\u003cli\u003eSight-to-plate screws are not included — use the screws supplied with the sight. With an EOTech EFLX use only the EFLX's own screws: the longer DeltaPoint Pro screws can bend or break the plate.\u003c\/li\u003e\n\u003cli\u003eVortex Defender: the sight comes with 11 mm and 9.8 mm M4 screws. Some 9.8 mm screws measure 9.87 mm and will protrude under the plate and bend it during installation — check screw length before use.\u003c\/li\u003e\n\u003cli\u003eDo not use with the Holosun SCS320; it will damage the plate. Not compatible with the SIG Romeo-X Pro (its lug holes are too shallow).\u003c\/li\u003e\n\u003cli\u003eBackup sights: the DeltaPoint Pro sits tall and needs equally tall sights for a lower 1\/3 co-witness; the Ameriglo GL-808 set gives a lower 1\/3 co-witness.\u003c\/li\u003e\n\u003cli\u003eA torque wrench graduated in in·lb is needed to tighten the screws to the stated values.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel, heat treated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e13 in·lb (1.5 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight-to-plate torque\u003c\/td\u003e\n\u003ctd\u003e25 in·lb (2.8 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-G, DPP plate\u003c\/li\u003e\n\u003cli\u003e2 × plate-to-slide screws, M3-0.5 × 6 mm\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-G, DPP — Glock MOS plate for Leupold DeltaPoint Pro, 4140 steel, black nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-G, DPP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546336174458,"sku":"77240","price":88.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-g-dpp-01.jpg?v=1794317398"},{"product_id":"forward-controls-design-opf-g-optic-plate-glock-gen-5-mos-eotech-eflx","title":"Forward Controls Design OPF-G Optic Plate – Glock Gen 5 MOS, EOTech EFLX","description":"\u003ch3\u003eA steel optic plate that mounts an EOTech EFLX on Glock MOS slides, with front and rear fences that hold the sight still under recoil.\u003c\/h3\u003e\u003cp\u003eThe OPF-G, EFLX uses the same design as the OPF-G, RMR: a front and a rear fence and tight plate-to-slide and sight-to-plate tolerances keep the sight from moving along the bore in recoil. It is a collaboration between TangoDown and Forward Controls Design.\u003c\/p\u003e\u003cp\u003eThe same plate is used for the EOTech EFLX and the Leupold DeltaPoint Pro, so the engraving on the plate may read DPP only.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront and rear fences\u003c\/strong\u003e — Hold the sight immobile so the mounting screws are not loaded in recoil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet 4140 steel\u003c\/strong\u003e — Machined from billet 4140, heat treated and black nitride coated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo sights, one plate\u003c\/strong\u003e — Fits the EOTech EFLX and the Leupold DeltaPoint Pro.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits standard Glock MOS slides only. It does not fit the law-enforcement-only MOS3 (DPP), MOS5 (RMR), MOS6 (Holosun 509T) or MOS7 (ACRO) slides.\u003c\/li\u003e\n\u003cli\u003eIt is not an adapter that converts an RMR footprint to a DeltaPoint Pro \/ EFLX footprint.\u003c\/li\u003e\n\u003cli\u003eSlides: Glock MOS G17, G19, G20, G21, G22, G23, G26, G34, G40, G45, G47 and G49. Does not fit the slimline G43X and G48.\u003c\/li\u003e\n\u003cli\u003eSights: EOTech EFLX and Leupold DeltaPoint Pro.\u003c\/li\u003e\n\u003cli\u003eSight-to-plate screws are not included. Use the 9.75 mm M4 screws supplied by EOTech with the EFLX. Do not use DeltaPoint Pro screws with an EFLX: they are longer and can bend or break the plate.\u003c\/li\u003e\n\u003cli\u003eBackup sights: the EFLX needs sight sets with a front sight height of at least 0.365 in. At 0.365 in only the tops of the sights are visible low in the window; 0.407 in sets are easier to use.\u003c\/li\u003e\n\u003cli\u003eA torque wrench graduated in in·lb is needed to tighten the screws to the stated values.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel, heat treated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e13 in·lb (1.5 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight-to-plate torque\u003c\/td\u003e\n\u003ctd\u003e20 to 25 in·lb (2.3 to 2.8 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-G, EFLX plate\u003c\/li\u003e\n\u003cli\u003e2 × plate-to-slide screws, M3-0.5 × 6 mm\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-G, EFLX — Glock MOS plate for EOTech EFLX, 4140 steel, black nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-G, EFLX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546336371066,"sku":"77241","price":88.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-g-eflx-01.jpg?v=1794317398"},{"product_id":"forward-controls-design-opf-g-optic-plate-glock-gen-5-mos-sig-romeo2","title":"Forward Controls Design OPF-G Optic Plate – Glock Gen 5 MOS, SIG Romeo2","description":"\u003ch3\u003eA steel optic plate that mounts a SIG Sauer Romeo2 red dot sight on Glock MOS slides.\u003c\/h3\u003e\u003cp\u003eThe OPF-G, Romeo2 is a Glock MOS compatible plate made for the SIG Romeo2, billet machined in 4140 steel, heat treated and black nitride coated.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect MOS fit\u003c\/strong\u003e — Mounts straight into the Glock MOS cut on slides that use Set 01 plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet 4140 steel\u003c\/strong\u003e — Machined from billet 4140, heat treated and black nitride coated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits standard Glock MOS slides only. It does not fit the law-enforcement-only MOS3 (DPP), MOS5 (RMR), MOS6 (Holosun 509T) or MOS7 (ACRO) slides.\u003c\/li\u003e\n\u003cli\u003eIt is not an adapter that converts an RMR footprint to a Romeo2 footprint.\u003c\/li\u003e\n\u003cli\u003eSlides: Glocks that use MOS Set 01 plates — G17, G19, G20, G21, G22, G23, G26, G34, G40, G45 and G47. The G40 uses the slightly wider Set 02 plates; the plate works on it but does not completely fill the width of the MOS cut.\u003c\/li\u003e\n\u003cli\u003eSights: SIG Romeo2 only. Not compatible with the older Romeo1 and Romeo1 Pro.\u003c\/li\u003e\n\u003cli\u003eDo not use with the Holosun SCS320; it will damage the plate.\u003c\/li\u003e\n\u003cli\u003eSight-to-plate screws are not included — use the screws supplied with the Romeo2.\u003c\/li\u003e\n\u003cli\u003eBackup sights: requires sight sets with a front sight height of at least 0.400 in.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel, heat treated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-G, Romeo2 plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide screws\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-G, Romeo2 — Glock MOS plate for SIG Romeo2, 4140 steel, black nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-G, ROMEO2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546336534906,"sku":"77242","price":88.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-g-romeo2-01.jpg?v=1794317398"},{"product_id":"forward-controls-design-opf-g-optic-plate-glock-gen-5-mos-rmrcc","title":"Forward Controls Design OPF-G Optic Plate – Glock Gen 5 MOS, RMRcc","description":"\u003ch3\u003eAn optic plate that mounts a Trijicon RMRcc on full-size and compact Glock MOS slides, holding the sight still under recoil.\u003c\/h3\u003e\u003cp\u003eThe OPF-G, RMRcc uses the same design as the OPF-G, RMR to keep the sight immobile on the plate, the simplest way to stop sight-to-plate screws loosening and shearing. The RMRcc has its own footprint, with two threaded posts through which the sight screws pass instead of the RMR's front lug holes.\u003c\/p\u003e\u003cp\u003eBecause the RMRcc is narrower than the RMR, the sight does not overhang the slide — useful for concealed carry of a full-size Glock.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSight held immobile\u003c\/strong\u003e — Same proven fence design as the OPF-G, RMR.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo slide overhang\u003c\/strong\u003e — The narrower RMRcc sits within the width of the slide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware included\u003c\/strong\u003e — Supplied with plate-to-slide and sight-to-plate Torx screws; the screws shipped with the RMRcc can also be used.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits standard Glock MOS slides only. It does not fit the law-enforcement-only MOS3 (DPP), MOS5 (RMR), MOS6 (Holosun 509T) or MOS7 (ACRO) slides.\u003c\/li\u003e\n\u003cli\u003eIt is not an adapter that converts an RMR footprint to an RMRcc footprint.\u003c\/li\u003e\n\u003cli\u003eSlides: Glock MOS G17, G19, G20, G22, G23, G26, G34, G40, G45 and G47. Does not fit the slimline G43X and G48.\u003c\/li\u003e\n\u003cli\u003eSights: Trijicon RMRcc.\u003c\/li\u003e\n\u003cli\u003eA torque wrench graduated in in·lb is needed to tighten the screws to the stated values.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e13 in·lb (1.5 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight-to-plate torque\u003c\/td\u003e\n\u003ctd\u003e18 in·lb (2.0 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eOptic cut\u003c\/td\u003e\n\u003ctd\u003eIncludes patented ZEV Technologies optic cut for use with Trijicon RMRcc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-G, RMRcc plate\u003c\/li\u003e\n\u003cli\u003e2 × plate-to-slide screws, M3-0.5 × 6 mm\u003c\/li\u003e\n\u003cli\u003e2 × sight-to-plate screws, T10, 5-40 × 1\/4 in\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-G, RMRcc — Glock MOS plate for Trijicon RMRcc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-G, RMRCC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546336633210,"sku":"77243","price":88.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-g-rmrcc-01.jpg?v=1794317398"},{"product_id":"forward-controls-design-opf-g6-optic-plate-glock-gen-6-ors-rmr","title":"Forward Controls Design OPF-G6 Optic Plate – Glock Gen 6 ORS, RMR","description":"\u003ch3\u003eA heavy-duty stainless steel optic plate that mounts a Trijicon RMR, RMR HD, SRO or RCR on Glock Gen 6 ORS slides.\u003c\/h3\u003e\u003cp\u003eThe OPF-G6, RMR replaces the polymer insert of the Glock Gen 6 Optic Ready System with a plate machined from a solid block of 17-4 stainless steel. Its underside is contoured to fill the spindle-shaped cavity in the ORS pocket, and a pocket at the rear engages the slide's locking tab, so the plate cannot rotate or shift.\u003c\/p\u003e\u003cp\u003eThe steel lugs do not give under sharp impact the way a polymer insert can, which keeps recoil load off the mounting screws. The plate fills the gap in front of and behind the sight on Gen 6 ORS slides.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e17-4 stainless steel\u003c\/strong\u003e — Milled from solid 17-4 stainless and black nitride treated; standard on all OPF-G6 plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUses the ORS locking features\u003c\/strong\u003e — Contoured underside and rear pocket engage the spindle cavity and rear locking tab of the Gen 6 slide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow mounting height\u003c\/strong\u003e — Made without full-width support, which would add 0.07 in of height; the RMR HD, SRO and RCR need no sealing plate and the RMR uses a thin sealing plate instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTight tolerances\u003c\/strong\u003e — Held tighter than the ORS pocket itself, for hard use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrews included\u003c\/strong\u003e — Four 6-32 × 1\/2 in T15 screws with 140,000 PSI tensile strength.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor Glock Gen 6 slides with the Optic Ready System (ORS).\u003c\/li\u003e\n\u003cli\u003eSights: made for and guaranteed to fit the Trijicon RMR, RMR HD, SRO and RCR only. Not made for, or guaranteed to work with, RMR-footprint sights from other manufacturers.\u003c\/li\u003e\n\u003cli\u003eAlso compatible with the Primary Arms HTX-1, using the adapter plate supplied in the blue bag with the HTX-1.\u003c\/li\u003e\n\u003cli\u003eA sealing plate is required with the RMR (not included). It is not required with the RMR HD, SRO or RCR.\u003c\/li\u003e\n\u003cli\u003eBecause of slide and sight tolerances there may be a very small gap between the plate's rear fence and the slide, or between the sight and the rear fence. Both fences are cosmetic on this plate, and so is the gap.\u003c\/li\u003e\n\u003cli\u003eInstallation: insert the rear of the plate into the rear of the ORS pocket at an angle, confirm the slide's locking tab has engaged the pocket in the plate, then rotate the front down. A firm press on the front may be needed to seat the plate fully.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e17-4 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.41 oz (12 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eScrew torque\u003c\/td\u003e\n\u003ctd\u003e13 to 15 in·lb (1.5 to 1.7 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-G6, RMR plate\u003c\/li\u003e\n\u003cli\u003e4 × screws, 6-32 × 1\/2 in, T15\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-G6, RMR — Glock Gen 6 ORS plate for Trijicon RMR \/ RMR HD \/ SRO \/ RCR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-G6, RMR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546336797050,"sku":"77244","price":104.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-g6-rmr-01.png?v=1794317399"},{"product_id":"forward-controls-design-opf-g6-optic-plate-glock-gen-6-ors-acro","title":"Forward Controls Design OPF-G6 Optic Plate – Glock Gen 6 ORS, ACRO","description":"\u003ch3\u003eA heavy-duty stainless steel optic plate that mounts an Aimpoint ACRO P-2 or Steiner MPS on Glock Gen 6 ORS slides.\u003c\/h3\u003e\u003cp\u003eThe OPF-G6, ACRO replaces the polymer insert of the Glock Gen 6 Optic Ready System with a plate milled from solid 17-4 stainless steel. It uses the entire ORS pocket to index: the underside is contoured to fill the spindle-shaped cavity and a relief at the rear engages the slide's locking tab, so the plate cannot rotate or shift.\u003c\/p\u003e\u003cp\u003eThe ACRO dovetail is kept to Aimpoint's specification rather than shortened to lower the sight, so the sight stays put on the plate. Because the plate must accommodate the countersink of the M4 screws used by the Gen 6 slide, the top of the dovetail sits above the slide.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e17-4 stainless steel\u003c\/strong\u003e — Milled from solid 17-4 stainless and black nitride treated; standard on all OPF-G6 plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-spec ACRO dovetail\u003c\/strong\u003e — Dovetail height follows Aimpoint's ACRO specification for full sight retention; it also seats the Steiner MPS properly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUses the ORS locking features\u003c\/strong\u003e — Contoured underside and rear relief engage the spindle cavity and rear locking tab of the Gen 6 slide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard M4 hardware\u003c\/strong\u003e — Uses US-made T20 M4-0.7 × 8 mm plate-to-slide screws rated at 140,000 PSI tensile strength, which are easy to source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightening cuts\u003c\/strong\u003e — Deep pockets on the underside reduce weight and are hidden once installed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor Glock Gen 6 slides with the Optic Ready System (ORS).\u003c\/li\u003e\n\u003cli\u003eSights: tested with and supported for the Aimpoint ACRO P-2 and Steiner MPS. Fit and function are not guaranteed for Chinese-made ACRO-footprint sights.\u003c\/li\u003e\n\u003cli\u003eBackup sights: the ACRO P-2 needs a front sight height of at least 0.385 in, which gives a lower 1\/4 co-witness. A 0.365 in sight set is sufficient for the Steiner MPS.\u003c\/li\u003e\n\u003cli\u003eHolsters: compatible with most duty holsters made for the Gen 6 MOS, such as the Safariland 6360. It is compatible with the TangoDown Lens Guard, but not with the Safariland 6360 when a TangoDown Lens Guard is fitted to the P-2.\u003c\/li\u003e\n\u003cli\u003eDepending on slide tolerances, a gap of 0.001 to 0.002 in can appear at the front underside of the plate. It is cosmetic. Fine tool marks inside the lightening cuts are not visible once the plate is installed.\u003c\/li\u003e\n\u003cli\u003eInstallation: insert the rear of the plate into the rear of the ORS pocket at an angle, confirm the slide's locking tab has engaged the pocket in the plate, then rotate the front down. A firm press on the front may be needed to seat the plate fully.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e17-4 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.14 oz (32 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e30 to 35 in·lb (3.4 to 4.0 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight torque — Aimpoint ACRO P-2\u003c\/td\u003e\n\u003ctd\u003e26 in·lb (2.9 N·m) maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight torque — Steiner MPS\u003c\/td\u003e\n\u003ctd\u003e18 in·lb (2.0 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-G6, ACRO plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide screws, M4-0.7 × 8 mm, T20\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-G6, ACRO — Glock Gen 6 ORS plate for Aimpoint ACRO P-2 \/ Steiner MPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-G6, ACRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546336993658,"sku":"77245","price":104.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-g6-acro-01.jpg?v=1794317397"},{"product_id":"forward-controls-design-opf-g6-optic-plate-glock-gen-6-ors-deltapoint-pro","title":"Forward Controls Design OPF-G6 Optic Plate – Glock Gen 6 ORS, DeltaPoint Pro","description":"\u003ch3\u003eA heavy-duty stainless steel optic plate that mounts a Leupold DeltaPoint Pro or EOTech EFLX on Glock Gen 6 ORS slides.\u003c\/h3\u003e\u003cp\u003eThe OPF-G6, DPP replaces the polymer insert of the Glock Gen 6 Optic Ready System with a plate milled from 17-4 stainless steel. Its underside is contoured to fill the spindle-shaped cavity in the ORS pocket and a relief at the rear engages the slide's locking tab, so the plate cannot rotate or shift.\u003c\/p\u003e\u003cp\u003eFour steel lugs support the four lug holes of the DeltaPoint Pro footprint and do not give under load the way a polymer insert can, keeping recoil load off the screws. The plate sits flush with the top of the ORS pocket so the sight is not raised.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e17-4 stainless steel\u003c\/strong\u003e — Milled from 17-4 stainless and black nitride treated; standard on all OPF-G6 plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour recoil lugs\u003c\/strong\u003e — All four lug holes of the DeltaPoint Pro footprint are supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-piece front fence\u003c\/strong\u003e — The Gen 6 pocket is shorter than the Gen 5 MOS, so the front fence is split, with the centre section omitted, rather than raising the plate and the sight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUses the ORS locking features\u003c\/strong\u003e — Contoured underside and rear relief engage the spindle cavity and rear locking tab of the Gen 6 slide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor Glock Gen 6 slides with the Optic Ready System (ORS).\u003c\/li\u003e\n\u003cli\u003eSights: fit and function are guaranteed only for the Leupold DeltaPoint Pro and EOTech EFLX series. It has not been tested on other DeltaPoint Pro footprint sights, whose dimensions vary.\u003c\/li\u003e\n\u003cli\u003eVortex Defender sights sit noticeably looser on this plate than the DeltaPoint Pro and EFLX, and Forward Controls Design states that compatibility with the Defender XT and ST depends on the production batch.\u003c\/li\u003e\n\u003cli\u003eSight screws are not included. Install the sight with the M4 screws that came with it and use the sight manufacturer's torque value. The slide's two larger, closer-set holes are the M4 holes for DeltaPoint Pro footprint sights.\u003c\/li\u003e\n\u003cli\u003eUse the long M4-0.7 × 15.8 mm screws only with a genuine Leupold DeltaPoint Pro; they are too long for any other sight.\u003c\/li\u003e\n\u003cli\u003eBackup sights: the DeltaPoint Pro needs a front sight height of at least 0.407 in. For the EFLX, 0.315 in works but sits very low; 0.350 in and 0.385 in are recommended.\u003c\/li\u003e\n\u003cli\u003eDepending on pocket depth, plate thickness and the sight, a gap of less than 0.001 in can appear under the sight. It is cosmetic and has no effect on function.\u003c\/li\u003e\n\u003cli\u003eInstallation: insert the rear of the plate into the rear of the ORS pocket at an angle, confirm the slide's locking tab has engaged the pocket in the plate, then rotate the front down. A firm press on the front may be needed to seat the plate fully.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e17-4 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight torque — Leupold DeltaPoint Pro\u003c\/td\u003e\n\u003ctd\u003e25 in·lb (2.8 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-G6, DPP — Glock Gen 6 ORS plate for Leupold DeltaPoint Pro \/ EOTech EFLX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-G6, DPP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546337223034,"sku":"77246","price":104.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-g6-dpp-01.jpg?v=1794317398"},{"product_id":"forward-controls-design-opf-g43x-48-optic-plate-glock-43x-48-mos-rmr","title":"Forward Controls Design OPF-G43X\/48 Optic Plate – Glock 43X\/48 MOS, RMR","description":"\u003ch3\u003eA steel optic plate that mounts a Trijicon RMR, RMR HD, SRO or RCR on the slimline Glock 43X MOS and Glock 48 MOS.\u003c\/h3\u003e\u003cp\u003eG43X and G48 MOS slides are cut for direct mounting of the Shield RMSc. The Trijicon RMR is longer and wider and needs an adapter plate, which raises the mounting surface. The OPF-G43X\/48, RMR adds recoil lugs and a front recoil fence that together hold the sight immobile, instead of leaving the screws to do it.\u003c\/p\u003e\u003cp\u003eBecause the RMR is longer than the G43X\/48 MOS cut, the sight overhangs the slide. A large lightening cut on the underside removes unneeded weight and is hidden once installed.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLugs and front fence\u003c\/strong\u003e — Recoil lugs and a front recoil fence hold the sight still before the screws are even torqued.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4140 steel\u003c\/strong\u003e — Machined from 4140 steel and black nitrided.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware included\u003c\/strong\u003e — Supplied with plate-to-slide screws and T15 sight-to-plate screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHidden lightening cut\u003c\/strong\u003e — Weight is removed from the underside, out of sight when the plate is in use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits the Glock G43X MOS and G48 MOS only. It will not work with other Glock models.\u003c\/li\u003e\n\u003cli\u003eDoes not fit the special-run FDE G43X, whose MOS pocket is different.\u003c\/li\u003e\n\u003cli\u003eSights: Trijicon RMR, SRO, RMR HD and RCR.\u003c\/li\u003e\n\u003cli\u003eBackup sights: a lower 1\/3 co-witness needs a sight set with a front sight of at least 0.450 in, such as the Ameriglo GL-527; the sight tips sit low in the window. The RMR HD and RCR need the taller Ameriglo GL-808 (0.500 in front sight). With the GL-808, install the plate first and the rear sight last.\u003c\/li\u003e\n\u003cli\u003eA torque wrench graduated in in·lb is needed to tighten the screws to the stated values.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.21 oz (34 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e20 to 25 in·lb (2.3 to 2.8 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight-to-plate torque\u003c\/td\u003e\n\u003ctd\u003e12 to 15 in·lb (1.4 to 1.7 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-G43X\/48, RMR plate\u003c\/li\u003e\n\u003cli\u003e2 × plate-to-slide screws, M4-0.7 × 9 mm\u003c\/li\u003e\n\u003cli\u003e4 × sight-to-plate screws, T15, 6-32 × 3\/8 in\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-G43X\/48, RMR \/ RMR HD \/ RCR — Glock 43X\/48 MOS plate for Trijicon RMR, SRO, RMR HD and RCR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-G43X\/48, RMR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546337354106,"sku":"77247","price":93.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-g43x-48-rmr-01.png?v=1794317401"},{"product_id":"forward-controls-design-opf-g43x-48-optic-plate-glock-43x-48-mos-rmrcc-4140-steel","title":"Forward Controls Design OPF-G43X\/48 Optic Plate – Glock 43X\/48 MOS, RMRcc (4140 Steel)","description":"\u003ch3\u003eAn optic plate that mounts a Trijicon RMRcc on the slimline Glock 43X MOS and Glock 48 MOS, in black nitrided 4140 steel.\u003c\/h3\u003e\u003cp\u003eG43X and G48 MOS slides are cut for direct mounting of the Shield RMSc; the Trijicon RMRcc needs an adapter plate. The OPF-G43X\/48, RMRcc keeps the sight as low as possible: with the sealing plate fitted, the bottom of the RMRcc sits almost flush with the top of the slide.\u003c\/p\u003e\u003cp\u003eThe RMRcc is longer than the G43X\/48 MOS cut and overhangs the slide. The sight is positioned towards the centre of the plate to reduce the unsupported overhang of its sealing plate, which keeps the seal around the battery compartment closed. A large lightening cut on the underside is hidden once installed.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow mounting height\u003c\/strong\u003e — The sight sits almost flush with the top of the slide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed battery compartment\u003c\/strong\u003e — Sight position on the plate eliminates the gap between the RMRcc and its sealing plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4140 steel\u003c\/strong\u003e — Machined from 4140 steel and black nitrided.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware included\u003c\/strong\u003e — Supplied with plate-to-slide and sight-to-plate screws; the screws shipped with the RMRcc can also be used.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits the Glock G43X MOS and G48 MOS only, with the original MOS footprint for direct mounting of RMSc sights. It will not work with other Glock models.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the special-run FDE G43X.\u003c\/li\u003e\n\u003cli\u003eSights: Trijicon RMRcc only. It will not work with other red dot sights.\u003c\/li\u003e\n\u003cli\u003eThe sealing plate supplied with the Trijicon RMRcc is required for installation.\u003c\/li\u003e\n\u003cli\u003eBackup sights: a lower 1\/3 co-witness needs a sight set with a 0.450 in front sight, such as the Ameriglo GL-527.\u003c\/li\u003e\n\u003cli\u003eA torque wrench graduated in in·lb is needed to tighten the screws to the stated values.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.75 oz (21 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e15 to 20 in·lb (1.7 to 2.3 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight-to-plate torque\u003c\/td\u003e\n\u003ctd\u003e15 to 18 in·lb (1.7 to 2.0 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-G43X\/48, RMRcc plate\u003c\/li\u003e\n\u003cli\u003e2 × plate-to-slide screws, M4-0.7 × 8 mm\u003c\/li\u003e\n\u003cli\u003e2 × sight-to-plate screws, T10, 5-40 × 1\/4 in\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-G43X\/48, RMRcc — Glock 43X\/48 MOS plate for Trijicon RMRcc, 4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-G43X\/48, RMRCC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546337485178,"sku":"77248","price":88.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-g43x-48-rmrcc-01.png?v=1794317401"},{"product_id":"forward-controls-design-opf-g43x-48-optic-plate-glock-43x-48-mos-rmrcc-17-4-ss","title":"Forward Controls Design OPF-G43X\/48 Optic Plate – Glock 43X\/48 MOS, RMRcc (17-4 SS)","description":"\u003ch3\u003eAn optic plate that mounts a Trijicon RMRcc on the slimline Glock 43X MOS and Glock 48 MOS, in 17-4 stainless steel for high-humidity use.\u003c\/h3\u003e\u003cp\u003eG43X and G48 MOS slides are cut for direct mounting of the Shield RMSc; the Trijicon RMRcc needs an adapter plate. The OPF-G43X\/48, RMRcc keeps the sight as low as possible: with the sealing plate fitted, the bottom of the RMRcc sits almost flush with the top of the slide.\u003c\/p\u003e\u003cp\u003eThe RMRcc is longer than the G43X\/48 MOS cut and overhangs the slide. The sight is positioned towards the centre of the plate to reduce the unsupported overhang of its sealing plate, which keeps the seal around the battery compartment closed. A large lightening cut on the underside is hidden once installed.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow mounting height\u003c\/strong\u003e — The sight sits almost flush with the top of the slide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed battery compartment\u003c\/strong\u003e — Sight position on the plate eliminates the gap between the RMRcc and its sealing plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e17-4 stainless steel\u003c\/strong\u003e — Stainless steel version, offered for divers and high-humidity environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware included\u003c\/strong\u003e — Supplied with plate-to-slide and sight-to-plate screws; the screws shipped with the RMRcc can also be used.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits the Glock G43X MOS and G48 MOS only, with the original MOS footprint for direct mounting of RMSc sights. It will not work with other Glock models.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the special-run FDE G43X.\u003c\/li\u003e\n\u003cli\u003eSights: Trijicon RMRcc only. It will not work with other red dot sights.\u003c\/li\u003e\n\u003cli\u003eThe sealing plate supplied with the Trijicon RMRcc is required for installation.\u003c\/li\u003e\n\u003cli\u003eBackup sights: a lower 1\/3 co-witness needs a sight set with a 0.450 in front sight, such as the Ameriglo GL-527.\u003c\/li\u003e\n\u003cli\u003eA torque wrench graduated in in·lb is needed to tighten the screws to the stated values.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e17-4 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.75 oz (21 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e15 to 20 in·lb (1.7 to 2.3 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight-to-plate torque\u003c\/td\u003e\n\u003ctd\u003e15 to 18 in·lb (1.7 to 2.0 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-G43X\/48, RMRcc plate\u003c\/li\u003e\n\u003cli\u003e2 × plate-to-slide screws, M4-0.7 × 8 mm\u003c\/li\u003e\n\u003cli\u003e2 × sight-to-plate screws, T10, 5-40 × 1\/4 in\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-G43X\/48, RMRcc — Glock 43X\/48 MOS plate for Trijicon RMRcc, 17-4 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-G43X\/48, RMRCC 17-4 SS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546337681786,"sku":"77249","price":97.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-g43x-48-rmrcc-01.png?v=1794317401"},{"product_id":"forward-controls-design-opf-g43x-48-optic-plate-glock-43x-48-mos-acro","title":"Forward Controls Design OPF-G43X\/48 Optic Plate – Glock 43X\/48 MOS, ACRO","description":"\u003ch3\u003eA steel optic plate that mounts an Aimpoint ACRO P-1 or P-2 or a Steiner MPS on the slimline Glock 43X MOS and Glock 48 MOS.\u003c\/h3\u003e\u003cp\u003eG43X and G48 MOS slides are cut for direct mounting of the Shield RMSc. The ACRO P-1 and P-2 and the Steiner MPS are longer and wider and need an adapter plate, which raises the mounting surface. The OPF-G43X\/48, ACRO puts a full-size enclosed sight on a slimline carry pistol.\u003c\/p\u003e\u003cp\u003eA large lightening cut on the underside removes unneeded weight and is hidden once installed.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-size window on a slim pistol\u003c\/strong\u003e — Mounts an enclosed-emitter ACRO-footprint sight on the G43X and G48.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4140 steel\u003c\/strong\u003e — Machined from 4140 steel and black nitrided.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHidden lightening cut\u003c\/strong\u003e — Weight is removed from the underside, out of sight when the plate is in use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits the Glock G43X MOS and G48 MOS only. It will not work with other Glock models.\u003c\/li\u003e\n\u003cli\u003eDoes not fit the special-run FDE G43X, whose MOS pocket is different.\u003c\/li\u003e\n\u003cli\u003eSights: Aimpoint ACRO P-1 and P-2 and Steiner MPS. Not guaranteed to work with Chinese-made clones.\u003c\/li\u003e\n\u003cli\u003eBackup sights: a sight set with a front sight of at least 0.450 in gives a very low, lower 1\/5 co-witness. The Ameriglo GL-808 is required for a lower 1\/4 co-witness; install the plate first and the rear sight last.\u003c\/li\u003e\n\u003cli\u003eA torque wrench graduated in in·lb is needed to tighten the screws to the stated values.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.64 oz (46 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e20 to 25 in·lb (2.3 to 2.8 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight torque — ACRO P-1\/P-2\u003c\/td\u003e\n\u003ctd\u003e26 in·lb (2.9 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight torque — Steiner MPS\u003c\/td\u003e\n\u003ctd\u003e20 in·lb (2.3 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-G43X\/48, ACRO plate\u003c\/li\u003e\n\u003cli\u003e2 × plate-to-slide screws, M4-0.7 × 10 mm\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-G43X\/48, ACRO — Glock 43X\/48 MOS plate for Aimpoint ACRO P-1\/P-2 and Steiner MPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-G43X\/48, ACRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546337878394,"sku":"77250","price":93.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-g43x-48-acro-01.jpg?v=1794317399"},{"product_id":"forward-controls-design-opf-fn509t-optic-plate-fn-509-tactical-rmr","title":"Forward Controls Design OPF-FN509T Optic Plate – FN 509 Tactical, RMR","description":"\u003ch3\u003eA one-piece steel optic plate that mounts a Trijicon RMR, SRO, RMR HD or RCR on FN 509 series optics-ready pistols.\u003c\/h3\u003e\u003cp\u003eThe factory FN 509 Tactical mounting system pairs a steel plate carrying the RMR lugs with a larger plastic piece that has no lugs. The OPF-FN509T, RMR replaces both with a single billet-machined steel plate, made with tight tolerances between plate and slide and between sight and plate.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-piece steel plate\u003c\/strong\u003e — Billet machined, with no separate plastic spacer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTight fit\u003c\/strong\u003e — Designed to fit snugly in the slide pocket and to hold the sight closely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps factory co-witness\u003c\/strong\u003e — Factory FN 509 Tactical sights remain usable and give a lower 1\/3 co-witness.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePistols: FN 509 series, FN 545 and FN 510. Not compatible with the FN 502 or FN Reflex.\u003c\/li\u003e\n\u003cli\u003eSights: Trijicon RMR, SRO, RMR HD and RCR. Not guaranteed to work with non-Trijicon sights that use the RMR footprint.\u003c\/li\u003e\n\u003cli\u003eWith the Trijicon RCR you must use the capstan screws supplied with the RCR.\u003c\/li\u003e\n\u003cli\u003eBecause of slide and plate tolerances the plate can be a very snug fit in the pocket; this is intended.\u003c\/li\u003e\n\u003cli\u003eThe screws supplied by FN with the 509 Tactical also work with this plate.\u003c\/li\u003e\n\u003cli\u003eA torque wrench graduated in in·lb is needed to tighten the screws to the stated values.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSteel, one-piece billet machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eScrew torque (6-40 × 1\/2 in, T10)\u003c\/td\u003e\n\u003ctd\u003e12 to 13 in·lb (1.4 to 1.5 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-FN509T, RMR plate\u003c\/li\u003e\n\u003cli\u003e2 × screws, 6-40 × 1\/2 in, T10\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-FN509T, RMR — FN 509 plate for Trijicon RMR \/ SRO \/ RMR HD \/ RCR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-FN509T, RMR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546338042234,"sku":"77251","price":88.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-fn509t-rmr-01.jpg?v=1794317398"},{"product_id":"forward-controls-design-opf-fn509t-optic-plate-fn-509-tactical-acro","title":"Forward Controls Design OPF-FN509T Optic Plate – FN 509 Tactical, ACRO","description":"\u003ch3\u003eA one-piece steel optic plate that mounts an Aimpoint ACRO P-1 or P-2 or a Steiner MPS on FN 509 series optics-ready pistols.\u003c\/h3\u003e\u003cp\u003eThe OPF-FN509T, ACRO is a single billet-machined steel plate for FN 509 series slides, built for enclosed-emitter sights on the ACRO footprint.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-piece steel plate\u003c\/strong\u003e — Billet machined in one piece.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible hardware\u003c\/strong\u003e — Supplied with Allen-head plate-to-slide screws; the pistol's own optic cover plate screws can also be used.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePistols: FN 509 series, FN 545 and FN 510. Not compatible with the FN 502 or FN Reflex.\u003c\/li\u003e\n\u003cli\u003eSights: Aimpoint ACRO P-1 and P-2 and Steiner MPS. Not guaranteed to work with low-cost copies that use the ACRO footprint.\u003c\/li\u003e\n\u003cli\u003eBackup sights: the tall suppressor-height sights of the FN 509 Tactical give a low co-witness — the tips of the front and rear sights are visible, the tritium dots are not.\u003c\/li\u003e\n\u003cli\u003eA torque wrench graduated in in·lb is needed to tighten the screws to the stated values.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSteel, one-piece billet machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e13 to 15 in·lb (1.5 to 1.7 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight torque — ACRO P-1\/P-2\u003c\/td\u003e\n\u003ctd\u003e26 in·lb (2.9 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight torque — Steiner MPS\u003c\/td\u003e\n\u003ctd\u003e20 in·lb (2.3 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-FN509T, ACRO plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide screws, 6-40 × 3\/8 in, 5\/64 in Allen drive\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-FN509T, ACRO — FN 509 plate for Aimpoint ACRO P-1\/P-2 and Steiner MPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-FN509T, ACRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546338337146,"sku":"77252","price":93.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-fn509t-acro-01.jpg?v=1794317398"},{"product_id":"forward-controls-design-opf-m17-optic-plate-sig-p320-m17-m18-acro","title":"Forward Controls Design OPF-M17 Optic Plate – SIG P320 M17\/M18, ACRO","description":"\u003ch3\u003eA steel optic plate that mounts an Aimpoint ACRO P-1 or P-2 or a Steiner MPS on M17\/M18 and SIG P320 slides with the DeltaPoint Pro cut.\u003c\/h3\u003e\u003cp\u003eThe OPF-M17, ACRO is a drop-in adapter precision machined from 4140 steel to the tight tolerances the Aimpoint ACRO footprint requires. It is a TangoDown design that Forward Controls Design offers under its own name, and it is compatible with military-issued M17 and M18 pistols.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4140 steel\u003c\/strong\u003e — Steel rather than aluminium, chosen for reliability and durability with steel screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fit\u003c\/strong\u003e — Replaces the factory optic cover plate without modification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-spec ACRO footprint\u003c\/strong\u003e — Machined to Aimpoint's ACRO specification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompatible: military-issued and civilian M17\/M18, P320 Compact, XCompact and Legion, slides with the Romeo1 Pro cut, DPP Pro cut or Pro cut, and the P320 AXG if the front of its optic cut is curved.\u003c\/li\u003e\n\u003cli\u003eNot compatible: P320 RX, Xray, R2, Spectre Comp, RXP, Max and XCarry, and the P320 AXG if the front of its optic cut is straight.\u003c\/li\u003e\n\u003cli\u003eThe slide must have the groove at the front of the optic pocket. If the cut in front of the optic pocket is straight, the plate will not fit.\u003c\/li\u003e\n\u003cli\u003eSights: guaranteed to work only with the Aimpoint ACRO P-1 and P-2 and the Steiner MPS. Other sights sold as ACRO-footprint have not been tested and are not supported.\u003c\/li\u003e\n\u003cli\u003eSteiner MPS: the recoil lug under the MPS can be slightly wider than that of the ACRO. If so, push the sight firmly onto the plate or tap it gently until it seats fully.\u003c\/li\u003e\n\u003cli\u003eThe supplied T20 Torx plate-to-slide screws do not sit flush with the plate; this is normal. Allen-head screws that sit flush are also supplied for Steiner MPS users.\u003c\/li\u003e\n\u003cli\u003eWhen removing the factory optic cover plate, hold the loaded chamber indicator (LCI) down with a finger or a piece of tape: its spring is very small, fragile and easily damaged.\u003c\/li\u003e\n\u003cli\u003eBackup sights: for a lower co-witness, Night Fision offers suitable sights (blade height option 455-440).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e20 in·lb (2.3 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight mounting screw torque — ACRO P-1\/P-2\u003c\/td\u003e\n\u003ctd\u003e26 in·lb (2.9 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight mounting screw torque — Steiner MPS\u003c\/td\u003e\n\u003ctd\u003e18 in·lb (2.0 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-M17, ACRO plate\u003c\/li\u003e\n\u003cli\u003e2 × plate-to-slide screws, M4-0.7 × 6 mm\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-M17, ACRO — M17\/M18 and SIG P320 plate for Aimpoint ACRO P-1\/P-2 and Steiner MPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-M17, ACRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546338533754,"sku":"77253","price":88.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-m17-acro-01.jpg?v=1794317398"},{"product_id":"forward-controls-design-opf-m17-optic-plate-sig-p320-m17-m18-acro-rear-sight-dovetail","title":"Forward Controls Design OPF-M17 Optic Plate – SIG P320 M17\/M18, ACRO, Rear Sight Dovetail","description":"\u003ch3\u003eA steel optic plate with an integrated rear sight dovetail that mounts an Aimpoint ACRO P-1 or P-2 or a Steiner MPS on civilian M17\/M18 and SIG P320 slides with the DeltaPoint Pro cut.\u003c\/h3\u003e\u003cp\u003eThe OPF-M17, ACRO, RSD is a drop-in adapter precision machined from 4140 steel to the tight tolerances the Aimpoint ACRO footprint requires. RSD stands for rear sight dovetail: the plate carries its own dovetail so a rear backup sight can be fitted behind the optic. It is a TangoDown design (SSM-03) that Forward Controls Design offers under its own name.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated rear sight dovetail\u003c\/strong\u003e — Lets a rear iron sight be installed on the plate itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4140 steel\u003c\/strong\u003e — Steel rather than aluminium, chosen for reliability and durability with steel screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-spec ACRO footprint\u003c\/strong\u003e — Machined to Aimpoint's ACRO specification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with military-issued M17\/M18 pistols. It works only with the civilian versions of the M17 and M18.\u003c\/li\u003e\n\u003cli\u003eCompatible: P320 X-Five Legion, Legion Carry and slides with the DP cut.\u003c\/li\u003e\n\u003cli\u003eNot compatible: P320 Pro Cut, sub-compact, X Carry, AXG, Spectre Comp, RX, Max and Grayguns slides.\u003c\/li\u003e\n\u003cli\u003eThe slide must have the groove at the front of the optic pocket; none of the plates will work without it.\u003c\/li\u003e\n\u003cli\u003eThe integrated rear sight dovetail is made for commonly available Glock-pattern rear sights; Truglo makes P320 backup sights specifically for TangoDown\/FCD plates. Do not force a SIG rear sight into the dovetail — it will damage the plate.\u003c\/li\u003e\n\u003cli\u003eSights: guaranteed to work only with the Aimpoint ACRO P-1 and P-2 and the Steiner MPS. Other sights sold as ACRO-footprint have not been tested and are not supported.\u003c\/li\u003e\n\u003cli\u003eSteiner MPS: the recoil lug under the MPS can be slightly wider than that of the ACRO. If so, push the sight firmly onto the plate or tap it gently until it seats fully.\u003c\/li\u003e\n\u003cli\u003eThe supplied T20 Torx plate-to-slide screws do not sit flush with the plate; this is normal. Allen-head screws that sit flush are also supplied for Steiner MPS users.\u003c\/li\u003e\n\u003cli\u003eWhen removing the factory optic cover plate, hold the loaded chamber indicator (LCI) down with a finger or a piece of tape: its spring is very small, fragile and easily damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e25 in·lb (2.8 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight mounting screw torque — ACRO P-1\/P-2\u003c\/td\u003e\n\u003ctd\u003e26 in·lb (2.9 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight mounting screw torque — Steiner MPS\u003c\/td\u003e\n\u003ctd\u003e18 in·lb (2.0 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-M17, ACRO, RSD plate\u003c\/li\u003e\n\u003cli\u003e2 × plate-to-slide screws, M4-0.7 × 6 mm\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-M17, ACRO, RSD — civilian M17\/M18 and SIG P320 plate with rear sight dovetail for Aimpoint ACRO P-1\/P-2 and Steiner MPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-M17, ACRO, RSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546338697594,"sku":"77254","price":93.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-m17-acro-rsd-01.jpg?v=1794317398"},{"product_id":"forward-controls-design-opf-p320-optic-plate-sig-p320-m17-m18-rmr-rear-sight-dovetail","title":"Forward Controls Design OPF-P320 Optic Plate – SIG P320 M17\/M18, RMR, Rear Sight Dovetail","description":"\u003ch3\u003eA steel optic plate with an integrated rear sight dovetail that mounts a Trijicon RMR, RMR HD or RCR on commercial M17\/M18 and SIG P320 slides.\u003c\/h3\u003e\u003cp\u003eThe OPF-P320, RMR, RSD is a drop-in adapter billet machined in 4140 steel and Melonite coated. RSD stands for rear sight dovetail: the plate carries its own dovetail so a rear backup sight can be fitted behind the optic. It is a collaboration between Forward Controls Design and TangoDown.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated rear sight dovetail\u003c\/strong\u003e — Lets a rear iron sight be installed on the plate itself.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet 4140 steel\u003c\/strong\u003e — Steel rather than aluminium, Melonite coated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware included\u003c\/strong\u003e — Supplied with plate-to-slide screws and T15 sight-to-plate screws.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with Army-issued M17\/M18 pistols, whose slides use a slightly different plate mounting.\u003c\/li\u003e\n\u003cli\u003eCompatible: commercial M17\/M18, P320 X-Five Legion, Legion Carry, and slides with the Romeo1 Pro \/ DPP cut.\u003c\/li\u003e\n\u003cli\u003eNot compatible: P320 Pro Cut, sub-compact, X Carry, AXG and RX.\u003c\/li\u003e\n\u003cli\u003eSights: designed and made for the Trijicon RMR; the RMR HD and RCR are also compatible. With the RCR you must use the capstan screws supplied with the RCR.\u003c\/li\u003e\n\u003cli\u003eDo not use the 6-32 × 1\/2 in screws supplied with the RMR HD — they are too long. Use 6-32 × 3\/8 in screws (Trijicon's or the ones supplied with the plate).\u003c\/li\u003e\n\u003cli\u003eHolosun 507C, 508T and 509T (with the adapter plate it comes with) also work on the plate, but fit and function are not guaranteed for these sights.\u003c\/li\u003e\n\u003cli\u003eThe integrated rear sight dovetail is made for commonly available Glock-pattern rear sights; Truglo makes P320 backup sights specifically for TangoDown\/FCD plates. Do not force a SIG rear sight into the dovetail — it will damage the plate.\u003c\/li\u003e\n\u003cli\u003eWhen removing the factory optic cover plate, hold the loaded chamber indicator (LCI) down with a finger or a piece of tape: its spring is very small, fragile and easily damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMelonite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e12 in·lb (1.4 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight-to-plate torque\u003c\/td\u003e\n\u003ctd\u003e12 in·lb (1.4 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-P320, RMR, RSD plate\u003c\/li\u003e\n\u003cli\u003e2 × plate-to-slide screws, 4-40 × 3\/16 in, Allen\u003c\/li\u003e\n\u003cli\u003e4 × sight-to-plate screws, T15, 6-32 × 3\/8 in\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-P320, RMR, RSD — commercial M17\/M18 and SIG P320 plate with rear sight dovetail for Trijicon RMR \/ RMR HD \/ RCR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-P320, RMR, RSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546338861434,"sku":"77255","price":93.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-p320-rmr-rsd-01.jpg?v=1794317399"},{"product_id":"forward-controls-design-opf-p320-optic-plate-sig-p320-rmr","title":"Forward Controls Design OPF-P320 Optic Plate – SIG P320, RMR","description":"\u003ch3\u003eA steel optic plate that mounts a Trijicon RMR, RMR HD, SRO or RCR on SIG P320 slides that have a separate optic plate and an independent rear sight.\u003c\/h3\u003e\u003cp\u003eThe OPF-P320, RMR is a drop-in adapter machined in 4140 steel and Melonite coated, for P320 slides on which the rear sight sits in its own dovetail and the optic plate can be removed independently. It is a collaboration between Forward Controls Design and TangoDown.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4140 steel\u003c\/strong\u003e — Steel rather than aluminium, Melonite coated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-in fit\u003c\/strong\u003e — Replaces the factory optic plate on compatible P320 slides.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits only SIG P320 slides with a separate optic plate and an independent rear sight in its own dovetail on the slide.\u003c\/li\u003e\n\u003cli\u003eWill not work on commercial or military-issued M17 and M18 pistols, or on any P320 whose rear sight and optic plate are integrated.\u003c\/li\u003e\n\u003cli\u003eIf the cut in front of the optic pocket is straight, the plate will not fit.\u003c\/li\u003e\n\u003cli\u003eSights: designed and made for the Trijicon RMR; the RMR HD and RCR are also compatible. With the RCR you must use the capstan screws supplied with the RCR.\u003c\/li\u003e\n\u003cli\u003eDo not use with Holosun sights: the plate is incompatible with all known Holosun sights that use the RMR footprint.\u003c\/li\u003e\n\u003cli\u003eThe RMR requires a sealing plate (not included); the RMR HD, RCR and SRO do not.\u003c\/li\u003e\n\u003cli\u003eBackup sights: for a lower co-witness, Night Fision offers suitable sights (blade height option 455-440).\u003c\/li\u003e\n\u003cli\u003eAccording to Forward Controls Design, the plate can be modified to work with the optics-ready SIG P226 by removing the two tabs at the front underside of the plate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eMelonite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eScrew torque (T15, 6-40 × 9\/16 in)\u003c\/td\u003e\n\u003ctd\u003e13 to 15 in·lb (1.5 to 1.7 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-P320, RMR — SIG P320 plate for Trijicon RMR \/ RMR HD \/ SRO \/ RCR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-P320, RMR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546339058042,"sku":"77256","price":93.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-p320-rmr-01.jpg?v=1794317399"},{"product_id":"forward-controls-design-opf-p365-macro-optic-plate-sig-p365-macro-rmrcc","title":"Forward Controls Design OPF-P365 Macro Optic Plate – SIG P365 Macro, RMRcc","description":"\u003ch3\u003eA steel optic plate that mounts a Trijicon RMRcc on the SIG Sauer P365 Macro and on P365X slides with the rear sight in its own dovetail.\u003c\/h3\u003e\u003cp\u003eThe OPF-P365 Macro, RMRcc gives the RMRcc a flat mounting surface on P365 slides that use M3 threaded posts in the optic pocket. This version has no rear sight dovetail. It is machined in 4140 steel and black oxide coated; it is not nitrided because nitriding would make the thin plate extension over the slide brittle.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4140 steel\u003c\/strong\u003e — Machined in 4140 steel with a black oxide finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOval indexer\u003c\/strong\u003e — An indexer under the plate mates with the slot in the slide's optic pocket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrews for current slides\u003c\/strong\u003e — Supplied with M3-0.5 × 8 mm plate-to-slide screws, as screw hole depth on P365 slides has varied between production years.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePistols: SIG Sauer P365 Macro, and the newer (from October 2022) P365X that has the rear sight in its own dovetail on the slide.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the SIG-LOC footprint — the P365 Fuse and the latest P365X slides, which have M4 tapped holes in the pocket instead of M3 threaded posts. Remove the cover plate and check the footprint before ordering.\u003c\/li\u003e\n\u003cli\u003eIt can be used on older P365X slides where the optic plate and rear sight are integrated, but no rear sight can then be fitted, as the plate has no rear sight dovetail.\u003c\/li\u003e\n\u003cli\u003eIt also fits the special-run FDE Glock 43X, where it sits 0.035 in taller.\u003c\/li\u003e\n\u003cli\u003eSights: Trijicon RMRcc. It will not work with an RMR.\u003c\/li\u003e\n\u003cli\u003eThe RMRcc sealing plate is required; it is supplied with the RMRcc by Trijicon.\u003c\/li\u003e\n\u003cli\u003eRemove the slide's optic cover plate and check that the slot in the centre of the pocket is present: the plate has an oval indexer that mates with it. Some slides lack the slot, and on those the indexer has to be removed from the plate before it will seat fully.\u003c\/li\u003e\n\u003cli\u003eBackup sights: with Night Fision sights for SIG the irons are very low but usable, and the tritium dot is partly obscured.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e15 in·lb (1.7 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight-to-plate torque\u003c\/td\u003e\n\u003ctd\u003e15 to 18 in·lb (1.7 to 2.0 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-P365 Macro, RMRcc plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide screws, M3-0.5 × 8 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-P365 Macro, RMRcc (no rear sight dovetail) — SIG P365 Macro plate for Trijicon RMRcc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-P365 MACRO, RMRCC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546341482874,"sku":"77257","price":93.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-p365-macro-rmrcc-01.jpg?v=1794317399"},{"product_id":"forward-controls-design-opf-p365x-optic-plate-sig-p365x-rmrcc-rear-sight-dovetail","title":"Forward Controls Design OPF-P365X Optic Plate – SIG P365X, RMRcc, Rear Sight Dovetail","description":"\u003ch3\u003eA steel optic plate with an integrated rear sight dovetail that mounts a Trijicon RMRcc on older-generation SIG Sauer P365X and P365XL slides.\u003c\/h3\u003e\u003cp\u003eOn the older P365X and P365XL the rear sight is part of the optic cover plate, so removing the plate to fit a red dot also removes the rear sight. The OPF-P365X, RMRcc gives the RMRcc a flat mounting surface and carries its own rear sight dovetail, so a backup rear sight can be kept. To do both, the plate has to be made rather tall.\u003c\/p\u003e\u003cp\u003eIt is machined in 4140 steel and black oxide coated; it is not nitrided because nitriding would make the thin plate extension over the slide brittle.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated rear sight dovetail\u003c\/strong\u003e — Cut for popular Glock-pattern rear sights, restoring a rear backup sight behind the optic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4140 steel\u003c\/strong\u003e — Machined in 4140 steel with a black oxide finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOval indexer\u003c\/strong\u003e — An indexer under the plate mates with the slot in the slide's optic pocket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePistols: older-generation SIG Sauer P365X and P365XL, where the optic plate and rear sight are integrated.\u003c\/li\u003e\n\u003cli\u003eNot compatible with the SIG-LOC footprint, the P365 Macro, or the newer (from October 2022) P365X that has the rear sight in its own dovetail on the slide.\u003c\/li\u003e\n\u003cli\u003eSights: Trijicon RMRcc.\u003c\/li\u003e\n\u003cli\u003eThe RMRcc sealing plate is required; it is supplied with the RMRcc by Trijicon.\u003c\/li\u003e\n\u003cli\u003eRemove the slide's optic cover plate and check that the slot in the centre of the pocket is present: the plate has an oval indexer that mates with it. Some slides lack the slot, and on those the indexer has to be removed from the plate before it will seat fully.\u003c\/li\u003e\n\u003cli\u003eBackup sights: the dovetail takes Glock-pattern rear sights. Forward Controls Design's BIS, P365X set, made with Ameriglo, gives a lower 1\/3 co-witness with the RMRcc; its front sight stands 0.510 in above the top of the slide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-P365X, RMRcc, RSD (rear sight dovetail) — SIG P365X \/ P365XL plate for Trijicon RMRcc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-P365X, RMRCC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546341581178,"sku":"77258","price":88.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-p365x-rmrcc-rsd-01.jpg?v=1794317399"},{"product_id":"forward-controls-design-opf-pdp-optic-plate-walther-pdp-v2-rmr","title":"Forward Controls Design OPF-PDP Optic Plate – Walther PDP v2, RMR","description":"\u003ch3\u003eA steel optic plate that mounts a Trijicon RMR, RMR HD, SRO or RCR on the Walther PDP v2, holding the sight immobile under recoil.\u003c\/h3\u003e\u003cp\u003eBased on Forward Controls Design's Glock MOS plate design, the OPF-PDP, RMR uses the same tight tolerances and the same design that holds the sight immobile on the plate. It is a solid-state design with no moving parts, machined from solid steel and black nitride treated, and it needs no sealing plate under the RMR.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSight held immobile\u003c\/strong\u003e — Same proven design as the OPF-G plates for the Glock MOS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sealing plate needed\u003c\/strong\u003e — The RMR mounts directly on the plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid steel\u003c\/strong\u003e — Machined from solid 1018 steel and black nitride treated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor the Walther PDP v2 only; v1 and v2 plates are not interchangeable. V2 slides have a longer optic cut (1.93 in at its longest, against 1.85 in on v1); according to Walther's 2021 information their serial numbers start with FDL9203, FDM0001 or FDN3124. Remove the cover plate and measure the cut to confirm the version before ordering.\u003c\/li\u003e\n\u003cli\u003eCompatible with the PDP-F.\u003c\/li\u003e\n\u003cli\u003eSights: Trijicon RMR, SRO, RMR HD and RCR. With the RCR you must use the capstan screws supplied with the RCR.\u003c\/li\u003e\n\u003cli\u003eUse only 3\/8 in long 6-32 sight screws. Do not use longer 1\/2 in screws.\u003c\/li\u003e\n\u003cli\u003eBackup sights: Ameriglo GL-811 or GL-506 give a lower 1\/3 co-witness.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e1018 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e13 in·lb (1.5 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight-to-plate torque\u003c\/td\u003e\n\u003ctd\u003e13 to 15 in·lb (1.5 to 1.7 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-PDP v2, RMR — Walther PDP v2 plate for Trijicon RMR \/ SRO \/ RMR HD \/ RCR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-PDP (V2), RMR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546341679482,"sku":"77259","price":88.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-pdp-v2-rmr-01.png?v=1794317423"},{"product_id":"forward-controls-design-opf-pdp-optic-plate-walther-pdp-v2-acro","title":"Forward Controls Design OPF-PDP Optic Plate – Walther PDP v2, ACRO","description":"\u003ch3\u003eA steel optic plate that mounts an Aimpoint ACRO P-1 or P-2 or a Steiner MPS on the Walther PDP v2.\u003c\/h3\u003e\u003cp\u003eBased on Forward Controls Design's Glock MOS plate design, the OPF-PDP v2, ACRO has the same tight tolerances and the same design that holds the sight immobile on the plate. It is a solid-state design with no moving parts, machined from solid 4140 steel and black nitride treated, and is a joint project with TangoDown.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSight held immobile\u003c\/strong\u003e — Same proven design as the OPF-G plates for the Glock MOS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid 4140 steel\u003c\/strong\u003e — Machined from solid 4140 steel and black nitride treated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware included\u003c\/strong\u003e — Supplied with plate-to-slide screws and threadlocker.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor the Walther PDP v2 only; it will not work on the PDP v1. V2 slides have a longer optic cut; according to Walther's 2021 information their serial numbers start with FDL9203, FDM0001 or FDN3124. Remove the cover plate to verify the version before ordering.\u003c\/li\u003e\n\u003cli\u003eCompatible with the PDP-F.\u003c\/li\u003e\n\u003cli\u003eSights: guaranteed to work only with the Aimpoint ACRO P-1 and P-2 and the Steiner MPS. Other sights sold as ACRO-footprint have not been tested and are not supported.\u003c\/li\u003e\n\u003cli\u003eBackup sights: Ameriglo GL-811, GL-815 or GL-506 give a lower 1\/3 co-witness; GL-429 gives a lower 1\/4 co-witness.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e13 in·lb (1.5 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight mounting screw torque — ACRO P-1\/P-2\u003c\/td\u003e\n\u003ctd\u003e26 in·lb (2.9 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight mounting screw torque — Steiner MPS\u003c\/td\u003e\n\u003ctd\u003e24 in·lb (2.7 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-PDP v2, ACRO plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide screws, M3-0.5 × 6 mm\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-PDP v2, ACRO — Walther PDP v2 plate for Aimpoint ACRO P-1\/P-2 and Steiner MPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-PDP (V2), ACRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546341745018,"sku":"77260","price":88.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-pdp-v2-acro-01.png?v=1794317425"},{"product_id":"forward-controls-design-opf-pdp-optic-plate-walther-pdp-v2-deltapoint-pro","title":"Forward Controls Design OPF-PDP Optic Plate – Walther PDP v2, DeltaPoint Pro","description":"\u003ch3\u003eA steel optic plate that mounts a Leupold DeltaPoint Pro, EOTech EFLX or Vortex Defender on the Walther PDP v2.\u003c\/h3\u003e\u003cp\u003eThe OPF-PDP v2, DPP has the same tight tolerances and the same design that holds the sight immobile on the plate as the other OPF plates. It is a solid-state design with no moving parts, machined from solid 4140 steel and black nitride treated.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSight held immobile\u003c\/strong\u003e — Tight tolerances between plate and slide and between sight and plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid 4140 steel\u003c\/strong\u003e — Machined from solid 4140 steel and black nitride treated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware included\u003c\/strong\u003e — Supplied with plate-to-slide screws and threadlocker.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor the Walther PDP v2. If unsure which version you have, remove the cover plate and verify it before ordering.\u003c\/li\u003e\n\u003cli\u003eSights: guaranteed to work only with the Leupold DeltaPoint Pro, EOTech EFLX and Vortex Defender XL and ST.\u003c\/li\u003e\n\u003cli\u003eSight-to-plate screws are not included — use the screws supplied with the sight. EOTech EFLX: the 9.75 mm M4 screws supplied by EOTech. Vortex Defender ST or XT: the screws labelled M4-0.7 × 9.8 mm. The long M4-0.7 × 15.8 mm DeltaPoint Pro screws are for the DeltaPoint Pro only; do not use them with the EFLX or Defender.\u003c\/li\u003e\n\u003cli\u003eSights whose base is not perfectly flat, such as the Vortex Defender ST, XT and the enclosed-emitter Defender, show a small gap on the plate, as they do on the plate supplied by Vortex. The gap has no function and does not appear with the EFLX or DeltaPoint Pro.\u003c\/li\u003e\n\u003cli\u003eBackup sights — DeltaPoint Pro: plain sight sets such as Ameriglo GL-507 (0.405 in front sight) or GL-808 (0.50 in front sight) are required. EOTech EFLX: sets such as GL-470 (0.349 in front sight) work; a 0.405 in front sight gives a co-witness halfway between absolute and lower 1\/3. Vortex Defender ST: a 0.405 in front sight gives a lower 1\/3 co-witness.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e13 in·lb (1.5 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight-to-plate torque — DeltaPoint Pro\u003c\/td\u003e\n\u003ctd\u003e25 in·lb (2.8 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-PDP v2, DPP plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide screws, M3-0.5 × 6 mm\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-PDP v2, DPP — Walther PDP v2 plate for Leupold DeltaPoint Pro, EOTech EFLX and Vortex Defender\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-PDP (V2), DPP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546341843322,"sku":"77261","price":88.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-pdp-v2-dpp-01.jpg?v=1794317421"},{"product_id":"forward-controls-design-opf-s-optic-plate-staccato-2011-p-c2-rmr","title":"Forward Controls Design OPF-S Optic Plate – Staccato 2011 P\/C2, RMR","description":"\u003ch3\u003eA steel optic plate with a rear sight dovetail that mounts a Trijicon RMR, RMR HD or RCR on optics-ready Staccato P, C, C2 and CS pistols.\u003c\/h3\u003e\u003cp\u003eThe OPF-S, RMR is precision milled from a solid block of 4140 steel and nitride coated — a solid-state plate with no moving parts. A substantial lightening cut keeps the plate as light as possible, which is why a sealing plate is needed under the Trijicon RMR.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid 4140 steel\u003c\/strong\u003e — Milled from a solid block and nitride coated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear sight dovetail\u003c\/strong\u003e — Takes a rear backup sight behind the optic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightening cut\u003c\/strong\u003e — Reduces the weight of the plate on the slide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePistols: optics-ready Staccato P, C, C2 and CS with the DPO optic cut and the factory or an aftermarket 0.265 in or 0.285 in front sight.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Staccato HD series pistols, or with Staccato pistols that have the older Duo optic cut.\u003c\/li\u003e\n\u003cli\u003eSights: Trijicon RMR, RMR HD and RCR. With the RCR you must use the capstan screws supplied with the RCR.\u003c\/li\u003e\n\u003cli\u003eA Trijicon or aftermarket RMR sealing plate is required (not included).\u003c\/li\u003e\n\u003cli\u003eThe plate has a rear sight dovetail for the steel OPF-S, RS rear sight that Forward Controls Design makes for the OPF-S plates (sold separately). The dovetail is also compatible with the rear sight of the Staccato 2011 DPO3 Optics Mount System, but not every DPO rear sight fits it.\u003c\/li\u003e\n\u003cli\u003eMeasure your front sight height from the top of the slide before choosing sights; some models have taller sights than the one used for development.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eNitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque (M4-0.7 × 8 mm)\u003c\/td\u003e\n\u003ctd\u003e20 to 25 in·lb (2.3 to 2.8 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight-to-plate torque (6-32 × 3\/8 in)\u003c\/td\u003e\n\u003ctd\u003e13 in·lb (1.5 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-S, RMR (Staccato) — Staccato P \/ C \/ C2 \/ CS plate for Trijicon RMR \/ RMR HD \/ RCR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-S, RMR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546341941626,"sku":"77262","price":121.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-s-rmr-01.jpg?v=1794317421"},{"product_id":"forward-controls-design-opf-s-optic-plate-staccato-2011-p-c2-acro","title":"Forward Controls Design OPF-S Optic Plate – Staccato 2011 P\/C2, ACRO","description":"\u003ch3\u003eA steel optic plate with a rear sight dovetail that mounts an Aimpoint ACRO P-1 or P-2 or a Steiner MPS on optics-ready Staccato P, C, C2 and CS pistols.\u003c\/h3\u003e\u003cp\u003eThe OPF-S, ACRO is precision milled from a solid block of 4140 steel and nitride coated — a solid-state plate with no moving parts, with lightening cuts to reduce reciprocating mass.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid 4140 steel\u003c\/strong\u003e — Milled from a solid block and nitride coated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear sight dovetail\u003c\/strong\u003e — Takes a rear backup sight behind the optic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightening cuts\u003c\/strong\u003e — Reduce the reciprocating mass on the slide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware included\u003c\/strong\u003e — Supplied with M4 plate-to-slide screws and threadlocker.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePistols: optics-ready Staccato P, C, C2 and CS with the DPO optic cut and the factory or an aftermarket 0.265 in or 0.285 in front sight.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Staccato HD series pistols, or with Staccato pistols that have the older Duo optic cut.\u003c\/li\u003e\n\u003cli\u003eSights: Aimpoint ACRO P-1 and P-2 and Steiner MPS. Fit is not guaranteed for low-cost copies or other sights with the ACRO footprint.\u003c\/li\u003e\n\u003cli\u003eThe plate has a rear sight dovetail for the steel OPF-S, RS rear sight that Forward Controls Design makes for the OPF-S plates (sold separately). The dovetail is also compatible with the rear sight of the Staccato 2011 DPO3 Optics Mount System, but not every DPO rear sight fits it.\u003c\/li\u003e\n\u003cli\u003eThe OPF-S, RS rear sight is compatible with the 0.285 in front sight of the Staccato P and the 0.265 in front sight of the C2.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eNitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque (M4-0.7 × 8 mm)\u003c\/td\u003e\n\u003ctd\u003e20 to 25 in·lb (2.3 to 2.8 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight torque — Aimpoint ACRO\u003c\/td\u003e\n\u003ctd\u003e26 in·lb (2.9 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight torque — Steiner MPS\u003c\/td\u003e\n\u003ctd\u003e18 in·lb (2.0 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-S, ACRO plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide screws, M4-0.7 × 8 mm\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-S (Staccato), ACRO — Staccato P \/ C \/ C2 \/ CS plate for Aimpoint ACRO P-1\/P-2 and Steiner MPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-S, ACRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546342039930,"sku":"77263","price":121.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-s-acro-01.jpg?v=1794317420"},{"product_id":"forward-controls-design-opf-sw-optic-plate-s-w-m-p-m2-0-core-rmr","title":"Forward Controls Design OPF-SW Optic Plate – S\u0026W M\u0026P M2.0 CORE, RMR","description":"\u003ch3\u003eA duty-grade steel optic plate that mounts a Trijicon RMR, SRO, RMR HD or RCR on Smith \u0026amp; Wesson M\u0026amp;P CORE 2.0 and M2.0 pistols.\u003c\/h3\u003e\u003cp\u003eThe OPF-SW, RMR is a collaboration between TangoDown and Forward Controls Design, precision machined in 4140 steel and black nitride coated. Fences on the plate cradle the sight and hold it immobile in recoil, and tight tolerances limit movement of the plate on the slide.\u003c\/p\u003e\u003cp\u003eUnlike the factory plastic plate, the plate is fastened to the slide with its own screws, and the sight is fastened to the plate separately — the sight screws do not pass through the plate into the slide. No sealing plate is needed under the RMR.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFences hold the sight\u003c\/strong\u003e — The sight is cradled on the plate and denied movement in recoil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate plate and sight screws\u003c\/strong\u003e — Plate-to-slide and sight-to-plate fasteners are independent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo sealing plate needed\u003c\/strong\u003e — The RMR mounts directly on the plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4140 steel\u003c\/strong\u003e — Precision machined and black nitride coated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePistols: Smith \u0026amp; Wesson M\u0026amp;P CORE 2.0 and M2.0 pistols.\u003c\/li\u003e\n\u003cli\u003eSights: guaranteed to fit and work only with the Trijicon RMR and SRO; the RMR HD and RCR are also compatible.\u003c\/li\u003e\n\u003cli\u003eHolosun 407C and 507C sights can work but are not supported. The supplied sight-to-plate screws fit only the RMR, RMR HD, RCR and SRO; with a Holosun, use the short screws that came with the sight.\u003c\/li\u003e\n\u003cli\u003eFactory sights are too low for this plate. For backup sights, Night Fision (sight product 464-560) and the Truglo SW-BUIS-WDO-NT are suitable.\u003c\/li\u003e\n\u003cli\u003eA torque wrench graduated in in·lb is needed to tighten the screws to the stated values.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.2 oz (34 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque (6-32 × 5\/16 in, T15)\u003c\/td\u003e\n\u003ctd\u003e25 in·lb (2.8 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight-to-plate torque\u003c\/td\u003e\n\u003ctd\u003e13 in·lb (1.5 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-SW, RMR plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide screws, 6-32 × 5\/16 in, T15\u003c\/li\u003e\n\u003cli\u003eSight-to-plate screws for Trijicon RMR, RMR HD, RCR and SRO\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-SW, RMR — Smith \u0026amp; Wesson M\u0026amp;P M2.0 CORE plate for Trijicon RMR \/ SRO \/ RMR HD \/ RCR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-SW, RMR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546342138234,"sku":"77264","price":93.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-sw-rmr-01.jpg?v=1794317420"},{"product_id":"forward-controls-design-opf-sw-optic-plate-s-w-m-p-m2-0-core-acro","title":"Forward Controls Design OPF-SW Optic Plate – S\u0026W M\u0026P M2.0 CORE, ACRO","description":"\u003ch3\u003eA duty-grade steel optic plate that mounts an Aimpoint ACRO P-1 or P-2 or a Steiner MPS on Smith \u0026amp; Wesson M\u0026amp;P CORE 2.0 and M2.0 pistols.\u003c\/h3\u003e\u003cp\u003eThe OPF-SW, ACRO is a collaboration between TangoDown and Forward Controls Design, precision machined in 4140 steel and black nitride coated, with lightening cuts to reduce reciprocating mass.\u003c\/p\u003e\u003cp\u003eThe plate is thick enough for the 6-32 plate-to-slide screws to sit flush or below flush, and the ACRO dovetail is kept to Aimpoint's specification rather than lowered, so the sight stays put on the plate.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-spec ACRO dovetail\u003c\/strong\u003e — Dovetail height follows Aimpoint's ACRO specification for full sight retention.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4140 steel\u003c\/strong\u003e — Precision machined and black nitride coated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightening cuts\u003c\/strong\u003e — Reduce the reciprocating mass on the slide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePistols: Smith \u0026amp; Wesson M\u0026amp;P CORE 2.0 and M2.0 pistols.\u003c\/li\u003e\n\u003cli\u003eSights: guaranteed to work only with the Aimpoint ACRO P-1 and P-2 and the Steiner MPS. Other sights sold as ACRO-footprint have not been tested and are not supported.\u003c\/li\u003e\n\u003cli\u003eFactory sights are too low for this plate. For backup sights, Night Fision (sight product 464-560) and the Truglo SW-BUIS-WDO-NT are suitable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.49 oz (42 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque (6-32 × 5\/16 in, T15)\u003c\/td\u003e\n\u003ctd\u003e25 in·lb (2.8 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight torque — ACRO P-1\/P-2\u003c\/td\u003e\n\u003ctd\u003e26 in·lb (2.9 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight torque — Steiner MPS\u003c\/td\u003e\n\u003ctd\u003e18 in·lb (2.0 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-SW, ACRO plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide screws, 6-32 × 5\/16 in, T15\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-SW, ACRO — Smith \u0026amp; Wesson M\u0026amp;P M2.0 CORE plate for Aimpoint ACRO P-1\/P-2 and Steiner MPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-SW, ACRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546342236538,"sku":"77265","price":93.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-sw-acro-01.png?v=1794317424"},{"product_id":"forward-controls-design-opf-vp9-optic-plate-hk-vp9-rmr","title":"Forward Controls Design OPF-VP9 Optic Plate – HK VP9, RMR","description":"\u003ch3\u003eA steel optic plate that mounts a Trijicon RMR, SRO, RMR HD or RCR on the Heckler \u0026amp; Koch VP9, holding the sight immobile under recoil.\u003c\/h3\u003e\u003cp\u003eLike the OPF-G, RMR for Glock MOS pistols, the OPF-VP9, RMR is designed to hold the sight immobile even before the sight screws are torqued. It is precision machined from 4140 steel and black nitrided.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSight held immobile\u003c\/strong\u003e — Same approach as the OPF-G, RMR plate for the Glock MOS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4140 steel\u003c\/strong\u003e — Precision machined and black nitride coated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware included\u003c\/strong\u003e — Supplied with plate-to-slide and sight-to-plate screws and threadlocker.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePistols: Heckler \u0026amp; Koch VP9. Not compatible with the HK VP9CC, or with the HK Parts MP5 mount that uses the VP9 slide footprint.\u003c\/li\u003e\n\u003cli\u003eSights: Trijicon RMR, SRO, RMR HD and RCR. With the RCR you must use the capstan screws supplied with the RCR.\u003c\/li\u003e\n\u003cli\u003eDo not use the screws supplied with the RMR HD — they are too long. Use the 6-32 × 3\/8 in screws supplied with the plate.\u003c\/li\u003e\n\u003cli\u003eHolosun: the same tight fit cannot be guaranteed. Never use the screws supplied with this plate with a Holosun sight — they are for Trijicon sights only (Holosun uses a 90° countersink, the RMR and SRO 82°), and long screws will damage and bend the plate.\u003c\/li\u003e\n\u003cli\u003eBackup sights: the taller suppressor-height sights of the VP9 Tactical give a lower 1\/3 co-witness. Lower co-witness sights are available from Night Fision.\u003c\/li\u003e\n\u003cli\u003eA torque wrench graduated in in·lb is needed to tighten the screws to the stated values.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque (M4-0.7 × 8 mm, T20)\u003c\/td\u003e\n\u003ctd\u003e20 in·lb (2.3 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight-to-plate torque (6-32 × 3\/8 in)\u003c\/td\u003e\n\u003ctd\u003e13 in·lb (1.5 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × OPF-VP9, RMR plate\u003c\/li\u003e\n\u003cli\u003e2 × plate-to-slide screws, M4-0.7 × 8 mm, T20\u003c\/li\u003e\n\u003cli\u003e4 × sight-to-plate screws, 6-32 × 3\/8 in\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-VP9, RMR — HK VP9 plate for Trijicon RMR \/ SRO \/ RMR HD \/ RCR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-VP9, RMR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546342334842,"sku":"77266","price":93.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-vp9-rmr-01.jpg?v=1794317421"},{"product_id":"forward-controls-design-opf-vp9-optic-plate-hk-vp9-acro","title":"Forward Controls Design OPF-VP9 Optic Plate – HK VP9, ACRO","description":"\u003ch3\u003eA steel optic plate that mounts an Aimpoint ACRO P-1 or P-2 or a Steiner MPS on the Heckler \u0026amp; Koch VP9.\u003c\/h3\u003e\u003cp\u003eDesigned for the HK VP9 and the Aimpoint ACRO P-1 and P-2, the OPF-VP9, ACRO is precision machined from 4140 steel and black nitride coated.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4140 steel\u003c\/strong\u003e — Precision machined and black nitride coated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for the ACRO footprint\u003c\/strong\u003e — Built for the Aimpoint ACRO P-1 and P-2; also takes the Steiner MPS.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePistols: Heckler \u0026amp; Koch VP9. Not compatible with the HK VP9CC.\u003c\/li\u003e\n\u003cli\u003eSights: guaranteed to work only with the Aimpoint ACRO P-1 and P-2 and the Steiner MPS. Other sights sold as ACRO-footprint have not been tested and are not supported.\u003c\/li\u003e\n\u003cli\u003eBackup sights: the taller suppressor-height sights of the VP9 Tactical give a lower 1\/3 co-witness with the ACRO P-1\/P-2, with the front dot partly obscured at the bottom. Through the larger window of the Steiner MPS the front tritium dot is fully visible. Co-witnessing sights are also available from Night Fision.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlack nitride\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003ePlate-to-slide torque (M4-0.7 × 8 mm, T20)\u003c\/td\u003e\n\u003ctd\u003e20 in·lb (2.3 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight torque — Aimpoint ACRO (T10 screw)\u003c\/td\u003e\n\u003ctd\u003e27 in·lb (3.1 N·m) maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight torque — Steiner MPS\u003c\/td\u003e\n\u003ctd\u003e18 in·lb (2.0 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-VP9, ACRO — HK VP9 plate for Aimpoint ACRO P-1\/P-2 and Steiner MPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-VP9, ACRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546342433146,"sku":"77267","price":93.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-opf-vp9-acro-01.jpg?v=1794317421"},{"product_id":"forward-controls-design-opf-g-optic-plate-glock-mos-rmsc","title":"Forward Controls Design OPF-G Optic Plate – Glock MOS, RMSc","description":"\u003ch3\u003eA Glock MOS optic plate for red dot sights that use the RMSc footprint.\u003c\/h3\u003e\u003cp\u003eThe OPF-G, RMSc belongs to Forward Controls Design's OPF line of optic plates for Glock MOS slides and is made for RMSc-compatible red dot sights.\u003c\/p\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSlides: Glock MOS.\u003c\/li\u003e\n\u003cli\u003eSights: red dot sights compatible with the RMSc footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eOPF-G, RMSc — Glock MOS plate for RMSc compatible red dot sights\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eOPF-G, RMSC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546342531450,"sku":"77268","price":88.39,"currency_code":"EUR","in_stock":true}]},{"product_id":"forward-controls-design-rbc-reinforced-battery-cap-aimpoint-acro-p-2","title":"Forward Controls Design RBC Reinforced Battery Cap – Aimpoint ACRO P-2","description":"\u003ch3\u003eA machined aluminium replacement for the factory plastic battery cap of the Aimpoint ACRO P-2.\u003c\/h3\u003e\u003cp\u003eThe RBC (Reinforced Battery Cap) was developed by Forward Controls Design with TangoDown. It is precision CNC machined from 6061-T6 aluminium and Type III hardcoat anodised in satin black to match the body of the P-2. It has a thicker profile than the factory cap, and tight tolerances make it match the battery compartment threads and come off easily.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo slots\u003c\/strong\u003e — An additional perpendicular slot makes battery changes easier; the deep, radiused slots take the Aimpoint tool or a coin without slipping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-ring seal\u003c\/strong\u003e — A supplied O-ring protects the battery cavity from moisture and dust.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuards the brightness controls\u003c\/strong\u003e — Used with a TangoDown AALG-series Lens Guard, the raised cap flanks the P-2's brightness buttons and helps prevent unintended presses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatching finish\u003c\/strong\u003e — Satin black hardcoat anodising matches the P-2.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits the Aimpoint ACRO P-2 only.\u003c\/li\u003e\n\u003cli\u003eDo not over-tighten: install until the O-ring seats and tighten no further.\u003c\/li\u003e\n\u003cli\u003eWith the red tool supplied by Aimpoint, use the curved side on the RBC, as its slots are also cut to take coins. The flat side is for the P-2's factory cap.\u003c\/li\u003e\n\u003cli\u003eNo known incompatibility with duty holsters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e6061-T6 aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eType III hardcoat anodised, satin black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e0.234 in (5.9 mm); factory cap 0.193 in (4.9 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × RBC battery cap\u003c\/li\u003e\n\u003cli\u003e1 × O-ring\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eRBC (Reinforced P2 Battery Cap) — for Aimpoint ACRO P-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eRBC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546342629754,"sku":"77269","price":25.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-rbc-acro-p2-01.jpg?v=1794317421"},{"product_id":"forward-controls-design-rlb-reinforced-locking-bar-aimpoint-acro-p-1-p-2","title":"Forward Controls Design RLB Reinforced Locking Bar – Aimpoint ACRO P-1\/P-2","description":"\u003ch3\u003eA reinforced steel locking bar (clamp) for the Aimpoint ACRO P-1 and P-2.\u003c\/h3\u003e\u003cp\u003eThe RLB (Reinforced Locking Bar) replaces the factory locking bar that clamps the ACRO to its mount. It is machined from 4140 steel and zinc phosphate coated, and is a collaboration between TangoDown and Forward Controls Design.\u003c\/p\u003e\u003cp\u003eIt is supplied with a slot-head screw in black oxide coated 18-8 stainless steel, which can be tightened or loosened with a flat screwdriver, a coin or a cartridge rim. Using it is optional: the T10 screw supplied by Aimpoint can be kept instead, and the slot-head screw also fits Aimpoint's factory locking bar.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4140 steel\u003c\/strong\u003e — Machined from 4140 steel and zinc phosphate coated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlot-head screw included\u003c\/strong\u003e — Can be worked without a Torx bit — with a flat screwdriver, coin or cartridge rim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoice of screw\u003c\/strong\u003e — Works with the supplied slot-head screw or the factory Aimpoint T10 screw.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFits the Aimpoint ACRO P-1 and P-2.\u003c\/li\u003e\n\u003cli\u003eDesigned to work with ACRO-footprint plates and slides that are made to Aimpoint's specification. It cannot correct problems caused by an out-of-spec plate or slide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e4140 steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eZinc phosphate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eScrew\u003c\/td\u003e\n\u003ctd\u003e18-8 stainless steel, black oxide, slot head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eLocking bar screw torque\u003c\/td\u003e\n\u003ctd\u003e27 in·lb (3.1 N·m) maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × RLB locking bar\u003c\/li\u003e\n\u003cli\u003e1 × slot-head screw, 18-8 stainless steel, black oxide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eRLB (Reinforced Locking Bar) for ACRO P1\/P2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eRLB, ACRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546342695290,"sku":"77270","price":25.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-rlb-acro-01.jpg?v=1794317421"},{"product_id":"forward-controls-design-rmr-mounting-screws-6-32-x-1-2-glock-gen-6-ors-4-pack","title":"Forward Controls Design RMR Mounting Screws 6-32 x 1\/2 – Glock Gen 6 ORS (4-pack)","description":"\u003ch3\u003eA pack of four 6-32 × 1\/2 in T15 screws for mounting a Trijicon RMR, RMR HD or SRO on Glock Gen 6 ORS slides.\u003c\/h3\u003e\u003cp\u003eOn Glock Gen 6 ORS slides the sight screws thread directly into the slide, and the screw holes are longer than on earlier generations. These are the sight-to-slide screws used with the \u003ca href=\"\/sv\/products\/forward-controls-design-opf-g6-optic-plate-glock-gen-6-ors-rmr\"\u003eOPF-G6, RMR plate\u003c\/a\u003e, offered as spares.\u003c\/p\u003e\u003cp\u003eSight mounting screws work under high stress and are consumables: law enforcement armourers rarely re-use them and replace them after battery changes on the RMR or on a schedule.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-strength screws\u003c\/strong\u003e — Tensile strength 140,000 PSI, hardness Rockwell C39.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e82° countersink\u003c\/strong\u003e — Matches the Trijicon RMR, RMR HD and SRO.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreadlocker included\u003c\/strong\u003e — Supplied with a packet of Vibra-Tite VC-3.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility and fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor mounting a Trijicon RMR, RMR HD or SRO on Glock Gen 6 ORS slides.\u003c\/li\u003e\n\u003cli\u003eThey will not work for RMR-to-plate mounting on Glock Gen 3 to Gen 5 MOS plates, which use shorter 6-32 × 3\/8 in screws.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Holosun 407C and 507C series sights.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eThread and length\u003c\/td\u003e\n\u003ctd\u003e6-32 × 1\/2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eDrive\u003c\/td\u003e\n\u003ctd\u003eT15 Torx\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountersink angle\u003c\/td\u003e\n\u003ctd\u003e82°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eTensile strength\u003c\/td\u003e\n\u003ctd\u003e140,000 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eHardness\u003c\/td\u003e\n\u003ctd\u003eRockwell C39\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eSight-to-slide torque\u003c\/td\u003e\n\u003ctd\u003e13 to 15 in·lb (1.5 to 1.7 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eIn the box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4 × screws, 6-32 × 1\/2 in, T15\u003c\/li\u003e\n\u003cli\u003e1 × packet of Vibra-Tite VC-3 threadlocker\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eModel information\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eForward Controls Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eModel\u003c\/td\u003e\n\u003ctd\u003eGen 6 RMR mounting screws (6-32 x 1\/2), package of 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"white-space:nowrap\"\u003eMPN\u003c\/td\u003e\n\u003ctd\u003eGEN 6 RMR MOUNTING SCREWS (6-32 X 1\/2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Forward Controls Design","offers":[{"title":"Default Title","offer_id":57546342859130,"sku":"77271","price":5.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/files\/forward-controls-design-gen-6-rmr-screws-6-32-x-1-2-01.jpg?v=1794317398"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0568\/3245\/8923\/collections\/FCD_logo.jpg?v=1794308178","url":"https:\/\/eurosec.eu\/sv\/collections\/forward-controls-design.oembed","provider":"Eurosec","version":"1.0","type":"link"}